3300 XL 8 mmProximity Transducer System 330104-00-05-10-02-CN

4. 3300 XL 8 mm components are both electrically and physically interchangeable with non-XL 3300 5 mm and 8 mm components. Although the packaging of the 3300 XL Proximitor Sensor differs from its predecessor, its design fits in the same 4-hole mounting pattern when used with the 4-hole mounting base, and will fit within the same mounting space specifications (when minimum permissible cable bend radius is observed). 

 5. Mixing XL and non-XL 3300-series 5 mm and 8 mm system components limits system performance to the specifications for the non XL 3300 5 mm and 8 mm Transducer System. 

 6. The 3300-series 5 mm probe (refer to Document 141605) uses smaller physical packaging, but does not reduce the side view clearances or tip-to-tip spacing requirements as compared to an 8mm probe. It is used when physical (not electrical) constraints preclude the use of an 8 mm probe. When your application requires narrow side view probes, use the 3300 NSv Proximity Transducer System (refer to Document 147385). 

 7. 8 mm probes provide a thicker encapsulation of the probe coil in the molded PPS plastic probe tip. This results in a more rugged probe. The larger diameter of the probe body also provides a stronger, more robust case. We recommend that you use 8 mm probes when possible to provide optimal robustness against physical abuse. 

 8. Each 3300 XL extension cable includes silicone tape that you can use instead of connector protectors. We do not recommend silicone tape for applications that will expose the probe-to-extension cable connection to turbine oil.

330101-00-08-05-02-00, 

330101-00-08-05-02 05, 

330101-00-08-10-02-00, 

330101-00-08-10 02-05, 

330101-00-12-10-02-00, 

330101-00-12-10 02-05, 

330101-00-16-10-02-00, 

330101-00-16 10-02-05, 

330101-00-20-05-02-00, 

330101-00 20-10-02-00, 

330101-00-20-10-02-05, 

330101 00-30-10-02-00, 

330101-00-30-10-02-05, 

330101-00-40-05-02-00, 

330101-00-40-10-02 00, 

330101-00-40-10-02-05, 

330101-00-60-10 02-00, 

330101-00-60-10-02-05, 

330102-00-20 10-02-00, 

330103-00-02-10-02-05, 

330103-00 04-10-02-00, 

330103-00-05-10-02-00, 

330104 00-06-10-02-00, 

330104-01-05-50-02-00, 

330105-02-12-05-02-00, 

330105-02-12-05-02 05, 

330105-02-12-10-02-00, 

330105-02-12-10 02-05, 

330106-05-30-05-02-00, 

330106-05 30-05-02-05, 

330106-05-30-10-02-00, 

330106 05-30-10-02-05.