VE6041F01C1 DeltaV Network Smart Switches EMERSON

the DeltaV LAN. The subnet address is preconfigured for DeltaV to make this setup even easier.

Switch Access Security

All user access to the switch is protected by passwords. The DeltaV Wizard provides a question and-answer format to change the default passwords, if desired. The switch is set up by default to allow remote access for view-only user functions and to access the Setup Wizard to make setup changes over the network. If desired, either or both of these remote access capabilities can be disabled using the wizard. If Telnet is disabled, the only configuration access to the switch will be via the serial connection directly at the switch. Disabling remote access has no impact on the one-click lockdown function. SNMP v3 access is always enabled in a view-only mode.

Compatible with all Versions of the DeltaV System

Switches are compatible with all versions of DeltaV for switching and monitor functions and can be used to expand or retrofit existing DeltaV systems and for replacement spares for some existing Cisco and Hirschmann switches—the auto switch lockdown is compatible only with DeltaV v10.3.

Compatible with non-DeltaV Switches

The DeltaV Smart Switch can also be installed in a mixed system with the currently supported Cisco or Hirschmann switches, as desired.  

Reliable Hardware

The DeltaV Smart Switch is based on hardware produced by a recognized supplier of industrial grade networking equipment. All switches are fan- less and have redundant power connections with external alarm contacts. They are also available in high temperature, conformal coated versions for use in harsh environments.

VE6041F01C1

VE6041F01C2

VE6041F03C1

VE6041F03C2

VE6041F04C1

VE6041F04C2

VE6041F05C1

VE6041F05C2

VE6041F06C1

VE6041F06C2

VE6041F07C1

VE6041F07C2