Woodward 03365 505E (Extraction / Admission)

Functionality

The 505E’s control capabilities are:

 Speed/Frequency Control

 Extraction / Admission Header Pressure Control

 Turbine or Generator Load Control or Limiting

 Turbine Inlet Header Pressure Control or Limiting

 Turbine Exhaust Header Pressure Control or Limiting

 Plant Import/Export Power Control or Limiting

 Isochronous Load Sharing between units (with DSLC™

control)

Features

 Critical Speed Avoidance (3 speed bands)

 Auto Start Sequence (hot & cold starts)

 Valve Limiter(s)

 Security (Program is Password Protected)

 Dual Speed/Load Dynamics

 First-Out Indication (Shutdowns)

 Zero Speed Detection with proximity probe (< 0.5 Hz)

 Peak Speed Indication for overspeed trip

 Two Programmable Functions Keys on the 505E’s front

panel

 Two independent Modbus comm links

 Remote analog setpoints for Speed/Load, Ext/Adm, Aux,

and Cascade

 Program upload/download capability

 Feed-forward decoupling algorithm for compressors

Operating Conditions

 –25 to +65 °C ambient air temperature range

 Optional NEMA type 4 (watertight and dust-tight, indoor/outdoor) enclosure for bulkhead mounting with a temperature range

from –25 to +55 °C

 Approximate dimensions 14L x 11H x 4D inches (356 x 279 x 102 mm)

 Approximate bulkhead enclosure dimensions 20L x 20H x 7.6D inches (508 x 508 x 193 mm)

 Humidity: Lloyd’s ENV2 test #1

 Dry heat: Lloyd’s ENV3

 Salt fog: US MIL-STD-810 method 509.2 procedure 1

 Shock: meets US MIL-STD-810C, method 516.2-1. procedure 1B

 Vibration: Lloyd’s ENV2 test #1

 Certifications: CE (18–32 Vdc version only), UL, & cUL

Pollution Resistance

 Particulate Pollution Resistance: IEC 664-1 Pollution Degree 2 (Normally only nonconductive pollution occurs. Temporary

conductivity caused by condensation is to be expected.)

 Gaseous Pollution Resistance: The polyacrylate conformal coating withstands NO2. CO2. SO2. and H2S gases per IEC

60068-2-60:1995 Part 2.60 Methods 1 and 4 (Flowing Mixed Gas Corrosion Test). It will withstand levels typical of

telecommunications and computer installations as defined by Battelle Labs Class III (between IEC 60721-3-3 classification

3C1 and 3C2. light industrial to urban industrial, heavy traffic).