X20CP148x and X20CP348x B&R

General information In order for the application project to be executed on the CPU, the Automation Runtime operating system, the system components and the application project must be installed on the CompactFlash card. Creating a CompactFlash using a USB card reader The easiest way to perform an initial installation is by creating a fully programmed CompactFlash card using a USB card reader. 1. Creating and configuring a project in Automation Studio 2. In Automation Studio, select Tools / Create CompactFlash 3. In the dialog box that opens, select a CompactFlash card and then generate it 4. Insert the finished CompactFlash into the CPU and turn on the CPU's supply voltage 5. CPU booting For details about commissioning: See Help system under "Automation Software - Getting Started" Installation via online connection The CPUs are delivered with a default B&R Automation Runtime (with limited functions) already installed. This runtime system is started in Boot mode (operating mode switch in the BOOT position or no CompactFlash / invalid CompactFlash inserted). It initializes the Ethernet interface and onboard serial RS232 interface, making it possible to download a new runtime system. 1. Insert the CompactFlash card and switch on the power to the CPU. When the switch is in the BOOT position, a new or invalid CompactFlash card starts the CPU with the default B&R Automation Runtime system. 2. Establish a physical online connection between programming device (PC or industrial PC) and CPU (e.g. over an Ethernet network or via the RS232 interface). 3. Before you can establish an online connection via Ethernet, the CPU must be assigned an IP address. In Automation Studio, go to Online / Settings and click on the Browse Targets button to search for B&R targets on the local network. The CPU should appear on the list. If the CPU hasn't already received an IP address from a DHCP server, right-click on it and select Set IP Parameters from the shortcut menu. In the dialog box that opens you can make all the necessary network configurations temporarily (should be identical to the settings in the project). 4. Configure online connection in B&R Automation Studio. For details about the configuration: See Help system under "Automation Software - Communication - Online communication" 5. Start the download procedure by selecting the Services command from the Project menu. Select Transfer Operating System... from the menu that appears. Now follow the instructions from B&R Automation Studio.

Gmail: yy4291644@gmail.com   Enterprise mailbox: ivy@kongjiangauto.com