RELIANCE 0-60063-1 Printed circuit board

0-60063-1-A printed circuit board is a PMI regulator motherboard specially designed for ASEA Brown Boveri/Reliance Electric SA3100 series, which is used in Automax distributed power supply system. The system provides variable frequency and variable voltage, which is suitable for the control and regulation of AC power inverter.

The board communicates with the AutoMax UDC module through two optical fiber connectors located at the edge of the circuit board, and is used to monitor the driving operation and run the motor control algorithm. In addition, it is equipped with a variety of interfaces, including PMI interface connector, AC power technology circuit, instrument port, Flex I/O, synchronous transmission port connector and PMI processor circuit.

The instrument port is located in the terminal board at the edge of the circuit board, which supports the connection of external analog devices with 14-22 AWG stranded wires (with a maximum length of 13 feet).

0-60063-1-A weighs about 1.69 pounds (excluding transportation materials), and its installation needs to be fixed on the key pin through four factory-drilled sliding sleeves, which should be carefully aligned to avoid damage.

Although OEM has stopped supplying this board, it can usually be found in https://www.abb-sis.com/.

Reliance Electric related SA3100 series and possible related models:

1. related models of sa3100 series

(AC power inverter for Automax distributed power system)

SA3100 (basic model with 0-60063-1-A motherboard)

SA3100C (possibly an improved version)

SA3100D (possibly higher power or enhanced)

2. Other related Automax control modules

(It may be used together with 0-60063-1-A PCB or belong to the same system)

UDC (Universal Drive Controller) module (communicating with 0-60063-1-A through optical fiber)

PMI (Power Module Interface) regulator related models.

0-60062-1-A (possibly an earlier version or supporting module)

0-60064-1-A (possible extended or upgraded model)

3. ABB/Reliance Electric inverter & controller with similar functions.

(Suitable for industrial motor control)

Reliance Electric FlexPak 3000 (modern alternative)

ABB ACS800/ACS880 (subsequent upgrade series)

4. Alternative/compatible models in AX Control inventory

(If 0-60063-1-A is out of stock, please check the following similar models.)

0-60063-2-A (revised or alternative version)

0-60063 Rev.B (possibly hardware revision)

If more specific models or alternatives are needed, it is recommended to directly consult ABB/Reliance Electric technical documentation or contact https://www.abb-sis.com/ for inventory information.