Meggitt 200-566-000-012 PLC board

Meggitt 200-566-000-012 is an IOCN input/output card for Vibro-Meter VM600 series vibration monitoring system. The card is a key component of the mechanical protection system (MPS) and the condition monitoring system (CMS) based on the rack, and has the following characteristics:

Functions and uses:

As controller and communication interface card, it is used for data acquisition, transmission and control.

Support a variety of communication interfaces, including Modbus RTU/TCP, PROFINET, etc., and can be connected with upper computers such as PLC and DCS.

It provides real-time monitoring, remote control and alarm functions, and has high signal-to-noise ratio and flexible configuration ability.

Technical parameters:

It has 16 dynamic channels and 4 speed channels, and each channel can support up to 20 processing outputs.

The data acquisition mode is asynchronous or synchronous sampling, which supports 24-bit data acquisition.

Equipped with multiple Ethernet and serial connectors for configuring multipoint networks.

Application scenario:

Widely used in electric power, petrochemical, metallurgical and other industries, for equipment vibration monitoring, fault diagnosis and health assessment.

Other information:

The weight of the card is about 1kg, the size is 130mm x 130mm x 70mm, and the installation method is flange installation.

To sum up, Meggitt 200-566-000-012 is a high-performance core component of industrial vibration monitoring equipment, which is suitable for vibration data acquisition and monitoring in various industrial environments.

The related models of Meggitt 200-566-000-012 PLC board include:

Meggitt 200-566-000-012: VM600 IOCN input/output card, used as communication interface and data gateway in VM 600 vibrometer system.

Meggitt 200-566-101-012: It also belongs to the VM600 vibrometer system as a part of the modular CPU card.