Bentley Nevada 3500/40m Front Monitor 140734-01N Display

Bentley Nevada 3500/40m Front Monitor 140734-01N Display

3500/40M Proximitor Monitor

Datasheet

Bently Nevada Machinery Condition Monitoring

Description 

The3500/40M Proximitor Monitoris a four-channel monitor that accepts input from Bently Nevada proximity transducers, conditions the signal to provide various vibration and position measurements, and compares the conditioned signals with user-programmable alarms. The user can program each channel of the 3500/40M with the 3500 Rack Configuration Software to perform any of the following functions: l Radial vibration l Eccentricity l REBAM l Thrust position l Differential expansion The primary purpose of the3500/40MProximitor Monitoris to provide the following: l Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms l Essential machine information for both operations and maintenance personnel Each channel, depending on configuration, typically conditions its input signal to generate various parameters called static values. You can configure alert setpoints for each active static value and danger setpoints for any two of the active static values.

Specifications Inputs Signal Accepts from 1 to 4 proximity  transducer signals Powerconsumption 7.7 Watts, typicalInput Impedance Standard I/O 10 kΩ (Proximitor and accelerationinputs Sensitivity Radial Vibration

3.94 mV/μm (100 mV/mil) or

7.87 mV/μm (200 mV/mil)

Thrust 3.94 mV/μm (100 mV/mil) or

7.87 mV/μm (200 mV/mil)

Eccentricity 3.94 mV/μm (100 mV/mil) or

7.87 mV/μm (200 mV/mil)

Differential Expansion

0.394 mV/μm (10 mV/mil) or

0.787 mV/μm (20 mV/mil)

REBAM 40 mV/μm (1000 mV/mil) or

80 mV/μm (2000 mV/mil)

Outputs

Front Panel LEDs

OK LED

Indicates when the 3500/40M

SIL Proximitor is operating

properly.

TX/RX LED

Indicates when the 3500/40M

SIL Proximitor is

communicating with other

modules in the 3500 rack.

Bypass LED

Indicates when the 3500/40M

SIL Proximitor is in Bypass

Mode.

Front Panel LEDs

Buffered

Transducer

Outputs

The front of each monitor has

one coaxial connector for each

channel.

Each connector is short-circuit

protected.

Output

Impedance 550 Ω

Transducer

Power

Supply

-24 Vdc

Signal Conditioning

Specified at +25ºC (+77ºF) unless

otherwise noted.

Radial Vibration

Frequency Response

Direct filter

User-programmable

Single-pole

4 Hz to 4000 Hz or

1 Hz to 600 Hz

Gap filter -3 dB at 0.09 Hz

Not 1X filter

60 cpm to 15.8 times running

speed

Constant Q notch filter

Minimum rejection in

stopband of -34.9 dB

Smax 0.125 to 15.8 times running

speed

1X and 2X

vector filter

Constant Q Filter

Minimum rejection in

stopband of -57.7 dB

The main applications in factories mainly include the following types of equipment:

Production line automation equipment: such as automatic assembly line, CNC machine tool, test line, etc. These equipment realize the automation and intelligence of production process by integrating mechanical, electronic, control and other technologies, and significantly improve production efficiency.

Industrial robot: it has the characteristics of high precision, high efficiency and high reliability, and can complete various operations such as welding, handling, palletizing and spraying. In the factories of automobile, electronics, machinery manufacturing and other industries, industrial robots are indispensable and important equipment.

Logistics warehousing automation equipment: including automated warehouse, intelligent handling equipment, sorting system, etc. Through the application of automation and information technology, these equipment can realize efficient, accurate and fast processing of goods and optimize the logistics process within the factory.

Other professional equipment: such as speed reducer (such as ZAE brand), encoder (such as Heidenhain brand), pump equipment (such as Roper Pumps brand), etc. These equipment play an important role in specific production links of the factory to ensure the stability and efficiency of the production process.

To sum up, automation equipment imported from Europe and America is widely and diversely used in factories, covering production, logistics and other links, which is of great significance for improving production efficiency and optimizing production processes.The main applications in factories mainly include the following types of equipment:

Production line automation equipment: such as automatic assembly line, CNC machine tool, test line, etc. These equipment realize the automation and intelligence of production process by integrating mechanical, electronic, control and other technologies, and significantly improve production efficiency.

Industrial robot: it has the characteristics of high precision, high efficiency and high reliability, and can complete various operations such as welding, handling, palletizing and spraying. In the factories of automobile, electronics, machinery manufacturing and other industries, industrial robots are indispensable and important equipment.

Logistics warehousing automation equipment: including automated warehouse, intelligent handling equipment, sorting system, etc. Through the application of automation and information technology, these equipment can realize efficient, accurate and fast processing of goods and optimize the logistics process within the factory.

Other professional equipment: such as speed reducer (such as ZAE brand), encoder (such as Heidenhain brand), pump equipment (such as Roper Pumps brand), etc. These equipment play an important role in specific production links of the factory to ensure the stability and efficiency of the production process.

To sum up, automation equipment imported from Europe and America is widely and diversely used in factories, covering production, logistics and other links, which is of great significance for improving production efficiency and optimizing production processes.