Bently Nevada 3500/77M Recip Cylinder Pressure Monitor

Bently Nevada 3500/77M Recip Cylinder Pressure Monitor

Description

The 3500/77M Recip Cylinder Pressure Monitor is a 4-channel monitor that accepts input from Bently Nevada approved pressure transducers, conditions the signal to make various pressure measurements for reciprocating compressors, and compares the conditioned signals with user-programmable alarms. The primary purpose of the 3500/77M monitor is to provide: l Machinery protection by continuously comparing monitored parameters against configured alarm setpoints to drive alarms. l Essential machine information for operations and maintenance personnel. Depending on configuration, each channel typically conditions its input signal to provide various parameters called measured variables.  Users can configure Alert setpoints for each active measured variable and Danger setpoints for any two of the active measured variables. Each channel of the 3500/77M will provide eight measured variable values that relate to cylinder pressure operation.  The five values that relate to a single chamber are as follows: l Discharge Pressure l Suction Pressure l Maximum Pressure l Minimum Pressure l Compression Ratio

Three measured variables combine one or more channel values with configured mechanical parameters to compute their value: l Peak Rod Compression l Peak Rod Tension l Degree of Rod Reversal For more information on the 3500/77M Recip Cylinder Pressure Monitor, refer to the User Guide (document 146282).

Compliance and Certifications FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 

This device may not cause harmful interference. 

This device must accept any interference received, including interference that may cause undesired operation. 

EMC European Community Directive: EMC Directive 2014/30/EU Standards: EN 61000-6-2; Immunity for Industrial Environments EN 61000-6-4; Emissions for Industrial Environments Electrical Safety European Community Directive: LV Directive 2014/35/EU Standards: EN 61010-1 RoHS European Community 

Directive: RoHS Directive 2011/65/EU Maritime DNV GL rules for classification – Ships, offshore units, and high speed and light craft ABS Rules for Condition of Classification, Part 1 l Steel Vessels Rules l Offshore Units and Structures

Ordering Considerations General The 3500/77M Module requires the following (or later) firmware and software revisions: l 3500/77M Module Firmware Revision L l 3500/01 Software – Version 3.00 l 3500/02 Software – Version 2.30 l 3500/03 Software – Version 1.30 External Termination Blocks cannot be used with Internal Termination I/O Modules. When ordering I/O Modules with External Terminations, the External Termination Blocks and Cables must be ordered separately. 

The lower limit for machine speed is 60 RPM in the standard product. For machine speeds down to 30 RP

The main applications in factories mainly include the following types of equipment:

Production line automation equipment: such as automatic assembly line, CNC machine tool, test line, etc. These equipment realize the automation and intelligence of production process by integrating mechanical, electronic, control and other technologies, and significantly improve production efficiency.

Industrial robot: it has the characteristics of high precision, high efficiency and high reliability, and can complete various operations such as welding, handling, palletizing and spraying. In the factories of automobile, electronics, machinery manufacturing and other industries, industrial robots are indispensable and important equipment.

Logistics warehousing automation equipment: including automated warehouse, intelligent handling equipment, sorting system, etc. Through the application of automation and information technology, these equipment can realize efficient, accurate and fast processing of goods and optimize the logistics process within the factory.

Other professional equipment: such as speed reducer (such as ZAE brand), encoder (such as Heidenhain brand), pump equipment (such as Roper Pumps brand), etc. These equipment play an important role in specific production links of the factory to ensure the stability and efficiency of the production process.

To sum up, automation equipment imported from Europe and America is widely and diversely used in factories, covering production, logistics and other links, which is of great significance for improving production efficiency and optimizing production processes.The main applications in factories mainly include the following types of equipment:

Production line automation equipment: such as automatic assembly line, CNC machine tool, test line, etc. These equipment realize the automation and intelligence of production process by integrating mechanical, electronic, control and other technologies, and significantly improve production efficiency.

Industrial robot: it has the characteristics of high precision, high efficiency and high reliability, and can complete various operations such as welding, handling, palletizing and spraying. In the factories of automobile, electronics, machinery manufacturing and other industries, industrial robots are indispensable and important equipment.

Logistics warehousing automation equipment: including automated warehouse, intelligent handling equipment, sorting system, etc. Through the application of automation and information technology, these equipment can realize efficient, accurate and fast processing of goods and optimize the logistics process within the factory.

Other professional equipment: such as speed reducer (such as ZAE brand), encoder (such as Heidenhain brand), pump equipment (such as Roper Pumps brand), etc. These equipment play an important role in specific production links of the factory to ensure the stability and efficiency of the production process.

To sum up, automation equipment imported from Europe and America is widely and diversely used in factories, covering production, logistics and other links, which is of great significance for improving production efficiency and optimizing production processes.

Related models

3500/77M

3500/05

3500/15

3500/20

3500/22M

3500/25

3500/32 

3500/33

3500/34

3500/92 

3500/93

3500/95

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-saving transformation and production of complete sets of electric control cabinets.

The company's main products and services include DCS/PLC system accessories, automation products, electrical equipment sales, computer software and hardware and auxiliary equipment wholesale. Since its establishment, the company has been adhering to the tenet of "honesty, pragmatism and innovation" and applied advanced automation technology, computer technology, sensing technology, frequency conversion technology, servo technology and industrial network technology to provide quality services for many enterprises such as food, machinery, papermaking, stone, water treatment and biotechnology.

The registered capital of the company is 3 million yuan, and the enterprise type is limited liability company (natural person investment or holding). The company has a dynamic and skilled team and maintains good cooperative relations with many well-known enterprises.

Please note that the above information may change with time. Please refer to the latest information published by official website or relevant authorities.