Vibro-Meter Protective measuring card MPC4 Mk2 SIL2 601-041-A10

Protective measuring card  MPC4 Mk2 SIL2  601-041-A10

Optionally, relay modules, and rack controller and

communications interface modules can also be

included.

Two types of rack are available: a VM600Mk2 system

rack (ABE04x – 6U) that can house up to twelve

monitoring modules, and a VM600Mk2 slimline rack

(ABE056 – 1U) that can house one monitoring

module. The racks are typically mounted in standard

19" rack cabinets or enclosures installed in an

equipment room.

Different VM600Mk2 monitoring modules are

available for machinery protection, condition

monitoring and/or combustion monitoring

applications. For example, the MPC4Mk2 + IOC4Mk2

modules (available in standard and SIL versions)

support both machinery protection and condition

monitoring, the XMV16 + XIO16T module supports

extended condition monitoring for vibration

applications, and the XMC16 + XIO16T module

supports extended condition monitoring for

combustion applications.

In VM600Mk2 systems, the AMC10Mk2 + IOC10Mk2

temperature and analog monitoring module adds

machinery protection and condition monitoring

support for applications with large numbers of slowly

varying (quasi-static) analog signals, such as

temperature and other process variables.

Note: For VM600Mk2 MPC4Mk2 + IOC4Mk2 modules,

machinery protection functionality is available by

DESCRIPTION (continued)

default and condition monitoring functionality is

optional. For VM600Mk2 AMC10Mk2 + IOC10Mk2

modules, both machinery protection and condition

monitoring functionality are available by default. It is

important to note that condition monitoring

functionality also depends on the purchased

VibroSight ® software license.

The RLC16Mk2 relay modules (standard and SIL

versions) are optional modules used to provide

additional relays when the four user-configurable

relays per MPC4Mk2 + IOC4Mk2 module and/or the

two user-configurable relays per

AMC10Mk2 + IOC10Mk2 module are not sufficient for

an application.

The CPUMMk2 + IOCNMk2 rack controller and

communications interface module is an optional

module used to provide additional VM600Mk2 system

functionality such as fieldbus communications;

module data aggregation, processing and sharing;

rack and/or fieldbus communications redundancy;

front-panel alarm reset (AR); MPS rack (CPUx)

security; system event and measurement event

logging.

VM600Mk2 rack-based monitoring systems

complement the VibroSmart ® distributed monitoring

systems that are also available from Parker Meggitt’s

vibro-meter ® product line, and are compatible with

the same VibroSight ® machinery monitoring

software suite.

MPC4Mk2 + IOC4Mk2 modules and

VM600Mk2 racks

MPC4Mk2 + IOC4Mk2 machinery protection and

condition monitoring modules are used as part of a

VM600Mk2 rack-based monitoring system.

A MPC4Mk2 module is always used with an

associated IOC4Mk2 module as a pair/set of modules

and can be used in a VM600Mk2 system rack

(ABE04x) or a slimline rack (ABE056).

Both the MPC4Mk2 and the IOC4Mk2 are single-width

modules that occupy a single VM600Mk2 rack slot

(module position). The MPC4Mk2 is installed in the

front of a VM600Mk2 rack and the associated

IOC4Mk2 is installed in the rear of the rack, in the slot

directly behind the MPC4Mk2. Each module connects

directly to the rack’s backplane using two

connectors