ABB 07KR51 1SBP260011R1001 Controller Basic Unit

ABB 07KR51 1SBP260011R1001 Controller Basic Unit

Detail description‌ABB 1SBP260010R1001 is 24 VDC and 1SBP260011R1001 is 120/230 VAC.

Catalog Description: 07KR51 Advant Controller 31 Basic Unit, part number 1SBP260010R1001, 8 Inputs, 6 relay outputs, 24 VDC power

Alternate Part Numbers: 07 KR 51, 1SBP260010R1001 and 1SBP260011R1001
1 - Location for the DIN rail 

2 - Plate fixture with unit earthing 

3 - Lock for DIN rail mounting 

4 - Location for external dual connector 

5 - Location for the cabling connectors: - of 24 V d.c. output power for the inputs (available only for the remote units with 120 / 230 V a.c. power) - of the inputs 

6 - Visualization set for the status of the 8 inputs / 6 outputs 

7 - Location of the connector for the connection of input/output extensions 

8 - Location of the cabling connectors: - the serial port for programming or communication ASCII / MODBUS - connector for the central unit power supply cabling - connectors for the outputs cabling 

9 - Location of the addressing rotate selectors (see enlargement) 

10 - Unit status visualization area:

 - POWER: power on - RUN: Blinking indicates the valid message received - ERR: On indicates error(s) present and blinking indicates configuration action Enlargement of item 9 without cover (see Figure) 1 - Potentiometer whose value is read into the IW62.01 variable by the program (value of 0 to 150 in the program) 2 - Screwdriver for potentiometer adjustment 3 - Potentiometer whose value is read into the IW62.00 variable by the program (value of 0 to 150 in the program) 4 - Central unit program ON/OFF switch

General operating conditions 

The 07KR51-HSB central units were developed according to the European EC directives, the main national and international IEC 1131-1 and IEC 1131-2 standards and the EN61131-2 product standard concerning automation devices.

 Ambient conditions

 - Temperature: operation: horizontal vertical storage transport 0°C to + 55°C 0°C to + 40°C - 40°C to + 75°C - 25°C to + 75°C 

- Humidity: annual average up to 30 days per year occasionally DIN 40040 class F without condensation ≤ 75% 95% 85%

 - Atmospheric pressure: operation storage DIN 40050 ≥ 800 hPA (≤ 2000 m) ≥ 600 hPA (≤ 3500 m) Mechanical data - Protection index 

- Unit - Vibration stress - Shock stress IP20 UL V2 CEI68-2-6 test Fc CEI68-2-27 test Ea Tolerances for mains voltages - 24 V d.c. - 120 V a.c. (50 / 60 Hz) - 230 V a.c. (50 / 60 Hz) 19.2 to 30 V (- 20%, + 25%) 97.75 to 126.5 V (- 18,5%, + 5,5%) 195.5 to 253 V (- 15%, + 10%)

Diagnosis & functions

All diagnosis on CS31 bus are available on the both hot stand-by central units, master and remote like remote unit disconnected, short circuit outputs, etc...If the hot stand-by remote central unit does not any traffic on the CS31 bus during one cycletime, the hot stand-by functions start. That means that the hot stand-by remote central unit starts control of inputs/outputs on CS31 bus, reset the bit %O62.08 to 0 and set the bit%O62.09 to 1 and assigns the outputs on CS31 bus according to the current result of thepresent program.

In case of an error in the hot stand-by master central unit, the hot stand-by remote central unitwill take over within a maximum of 3 cycle times. That means that the inputs in the hot standby remote central unit will remain with the same value during three cycle times before beingrefreshed.

If the part of program in the both hot stand-by central units, master and remote who managethe outputs on CS31 are different, it could happen a discontinuity in the status of outputs.

In case of conflict, like two masters on CS31 bus, the hot stand-by central unit configuredpreviously in remote will be switch in hot stand-by remote central unit even if it is in masteroperation.

If the central unit master goes in STOP mode, the CS31 bus outputs are reset to 0. And thehot stand-by function is not activated. The bit %O62.08 is reset to 0 in the both hot stand-bycentral units, master and remote.

If the central unit master is again in RUN mode, the bit %O62.08 is reset to 1 in the both hotstand-by central units, master and remote and the cycle times are synchronized but values ofvariables in the both hot stand-by central units, master and remote can be different.

If the hot stand-by remote central unit does not any traffic on the CS31 bus during one cycletime, the hot stand-by functions start. That means that the hot stand-by remote central unit starts control of inputs/outputs on CS31 bus, reset the bit %O62.08 to 0 and set the bit%O62.09 to 1 and assigns the outputs on CS31 bus according to the current result of thepresent program. If the part of program in the both hot stand-by central units, master and remote who manage the outputs on CS31 are different, it could happen a discontinuity in the status of outputs.

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-saving transformation and production of complete sets of electric control cabinets.

The company's main products and services include DCS/PLC system accessories, automation products, electrical equipment sales, computer software and hardware and auxiliary equipment wholesale. Since its establishment, the company has been adhering to the tenet of "honesty, pragmatism and innovation" and applied advanced automation technology, computer technology, sensing technology, frequency conversion technology, servo technology and industrial network technology to provide quality services for many enterprises such as food, machinery, papermaking, stone, water treatment and biotechnology.

The registered capital of the company is 3 million yuan, and the enterprise type is limited liability company (natural person investment or holding). The company has a dynamic and skilled team and maintains good cooperative relations with many well-known enterprises.

Please note that the above information may change with time. Please refer to the latest information published by official website or relevant authorities.

Related models

O3EHa HENF315087R2

REF610C55LCNR

D2D146-AA28-2

AO810V2 3BSE038415R1

81EU01H-E

DSQC633

P3EA HENF315216R1

PPD512A10-150000

5SDF0860H0003

UAD154A

DIS0006

TC520 3BSE001449R1

SPBRC400