ABB NKLS01-3 Loop Interface Cable

ABB NKLS01-3 Loop Interface Cable

Loop Interface Cable Manufacturers ABB, Bailey Model(s) ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90 Estimated Shipping 

Size Dimensions: 0.0" x 0.0" x 0.0" (0.0 cm x 0.0 cm x 0.0 cm) 

Weight: 0 lbs 9.0 oz (0.3kg ) 

‌‌ABB cable installation mainly involves cable connection, fixing and related matters needing attention. The following are the specific installation steps and key points:

Cable connection:

According to the type and purpose of the cable, choose the appropriate connection mode. For example, for the cable of ABB robot, it is necessary to ensure that the cable matches the interface of the robot body, control cabinet and other equipment and is connected according to the correct wiring diagram.

During the connection, pay attention to the shielding treatment of the cable. For cables that need shielding, ensure that the shielding layer is grounded 360 at the cable entrance to ensure good shielding effect.

Cable fixing:

After the cable is connected, it needs to be properly fixed to prevent the cable from shaking or falling off during the robot movement or equipment operation.

Cable clamps, cable ties and other tools can be used to fix the cable to ensure the stability and reliability of the cable.

Precautions:

Before installing the cable, check the insulation resistance of the cable to ensure the good insulation performance of the cable. For ABB motors, the insulation resistance must be greater than 100 Mohm (at 25℃ or 77°F).

When connecting cables, local specifications and technical documents provided by manufacturers should be followed to ensure the correctness and safety of the connection.

For cables that need to be removed or replaced, such as the five-and six-axis cables of ABB large robots, correct steps should be followed to avoid damaging cables or equipment.

Installation of special cables:

For some special types of cables, such as detachable connector cables, it is necessary to install them according to specific installation instructions. This includes four steps: peeling off the sheath layer, grounding treatment, and installing the cold-shrinkable extension pipe.

To sum up, the installation of ABB cable is a detailed and important process, which needs to follow the correct installation steps and precautions to ensure the reliability and safety of the cable. In the installation process, special attention should be paid to the connection and fixation of cables and the inspection of insulation resistance. At the same time, special types of cables should be installed according to specific installation instructions.

DSSR122 4899001-NK

DSDI452

DSDX451

DSAX452

DSDX452

REF541KM118AAAA

4943013-6

3BSC840088R4 MSTB2.5-5.08

MSTB2.5-5.08

PM864AK01

TB850

UNITROL1000 Z.V3

3BHE014557R0003

UNITROL1000 Z.V3 3BHE014557R0003

5SHY3545L0009

REF615CC HCFFAEAGANB2BAN1XC