ABB NKTU11-18 I/O Module to Termination Unit Cable

ABB NKTU11-18 I/O Module to Termination Unit Cable

Module to Termination Unit Cable Manufacturers ABB, Bailey Model(s) ABB Bailey Infi 90, ABB Bailey Infi 90 and Net 90 Additional Information I/O Module to Termination Unit Cable, NKTU11-18, Connects I/O Module to Termination Unit, 18 feet long, non-PVC Estimated Shipping 

Size Dimensions: 14.0" x 3.0" x 13.0" (35.6 cm x 7.6 cm x 33.0 cm) 

Weight: 2 lbs 12.0 oz (1.2kg ) 

The connection steps of ABB NKTU11-18 I/O module to terminal unit cable are as follows:

Installing the terminal unit cable: Before installing the terminal unit cable, the module must be removed from its assigned slot to avoid damaging the module.

Connecting J2 connector: Install J2 connector of NKTU01 or NKTU11 terminal unit cable into the slot allocated to I/O module on the back plate of module installation unit.

Insert J1 connector: insert the J1 connector of the cable into P1 port of the terminal unit.

Signal connection: According to Table B-2, the cable pin connection between P3 connector of I/O module and P1 connector of terminal unit is as follows:

P31 is connected to P12

Other stitches also have corresponding relationships.

Precautions for power supply wiring: When connecting the power supply, be careful not to apply an input voltage exceeding 120Vac to E1 or E2 port to prevent the total voltage level from exceeding the voltage rating of NTDI02 due to different phases, thus damaging the terminal unit.

Through the above steps, ABB NKTU11-18 I/O module can be correctly connected with the terminal unit cable, and the normal operation of the system can be ensured.

3ASC25H219B DATX133

TU890 3BSC690075R1

5SHY3545L0010 3BHB013088R0001 3BHE009681R0101 GVC750BE101

SC520 3BSE003816R1

SAM3.0

DRA02

REF542 1VCR007346 G0028

SC510 3BSE003832R1

DYPS154C 61430001-YP

DSTD108

RF615  RC610

FI820F

3HAB8859-1/03A

3HAC7344-1

PS203PRESPMCPS

TAS.580.0540G00

CI534V02 3BSE010700R1

SC510 3BSE003832R1

V4550220-0100

FM9925A-E

3HAC7681-1