OMRON CQM1H-MAB42 PLC

OMRON CQM1H-MAB42  PLC

Support Software

Note1:Site licenses are available for users who will run CX-One on multiple computers. Ask your OMRON sales representative for details.

2:Before ordering the software on a DVD, be sure that your computer and drive are compatible with the DVD format.

*The CXONE-AL00D-V4 contains only the DVD installation media for users who have purchased the CX-One Version 4. @ and does not include the license number.

Enter the license number of the CX-One Version 4. @ when installing.

(The license number of the CX-One Version 3. @ or lower cannot be used for installation.)

●Support Software in CX-One Ver.4.@

The following tables lists the Support Software that can be installed from CX-One.

Note:If the complete CX-One package is installed, approximately 4.0 GB of Hard disk space will be required.

Programming Devices

Product name Specifications Model Number of Model

Standards licenses Media

FA Integrated Tool

Package

CX-One Ver.4.@

The CX-One is a comprehensive software package that integrates

Support Software for OMRON PLCs and components.

CX-One runs on the following OS.

Windows XP (Service Pack 3 or higher, 32-bit version) / Windows Vista

(32-bit/64-bit version) / Windows 7 (32-bit/64-bit version) / Windows 8

(32-bit/64-bit version) / Windows 8.1 (32-bit/64-bit version) / Windows

10 (32-bit/64-bit version)

CX-One Version 4.@ includes CX-Programmer and CX-Simulator.

For details, refer to the CX-One catalog (Cat. No. R134).--- (Media only) * DVD CXONE-AL00D-V4

1 license DVD CXONE-AL01D-V4

3 licenses DVD CXONE-AL03D-V4

10 licenses DVD CXONE-AL10D-V4

30 licenses DVD CXONE-AL30D-V4

50 licenses DVD CXONE-AL50D-V4

Support Software in CX-One Outline

CX-Programmer Application software to create and debug programs for CS/CJ/CP/NSJ-series, C-series, and CVM1/C-series CPU Units, and to

create and monitor data for CS/CJ-series Position Control Units.

CX-Integrator

Application software to build and set up FA networks, such as Controller Link, DeviceNet, CompoNet, CompoWay/F, and Ethernet

networks. The Routing Table Component and Data Link Component can be started from here. DeviceNet Configuration

functionality is also included.

Switch Box Utility Utility software that helps you to debug PLCs. It helps you to monitor the I/O status and to monitor/change present values within

the PLC you specify.

CX-Protocol Application software to create protocols (communications sequences) between CS/CJ/CP/NSJ-series or C200HX/HG/HE Serial

Communications Boards/Units and general-purpose external devices.

CX-Simulator Application software to simulate CS/CJ/CP/NSJ-series CPU Unit operation on the computer to debug PLC programs without a

CPU Unit.

CX-Position Application software to create and monitor data for CS/CJ-series Position Control Units. (except for High-speed type)

CX-Motion-NCF Application software to creat and monitor data for CS/CJ-series Position Control Units with MECHATROLINK-II * interface

(NC@71).

CX-Motion-MCH Application software to create data, and monitor program, and monitor data for CS/CJ-series Motion Control Units with

MECHATROLINK-II * interface (MCH71).

CX-Motion Application software to create data for CS/CJ-series, C200HX/HG/HE, and CVM1/CV-series Motion Control Units, and to create

and monitor motion control programs.

CX-Drive Application software to set and control data for Inverters and Servos.

CX-Process Tool Application software to create and debug function block programs for CS/CJ-series Loop Controllers (Loop Control Units/Boards,

Process Control CPU Units, and Loop Control CPU Units).

Faceplate

Auto-Builder for NS

Application software that automatically outputs screen data as project files for NS-series PTs from tag information in function

block programs created with the CX-Process Tool.

CX-Designer Application software to create screen data for NS-series PTs.

NV-Designer Applications software to create screen data for NV-series small PTs.

CX-Configurator FDT Applications software to setting various units by installing its DTM module.

CX-Thermo Application software to set and control parameters in components such as Temperature Control Units.

CX-FLnet Application software for system setting and monitoring of CS/CJ-series FL-net Units.

Network Configurator Application software for setting the tag datalink at the built-in EtherNet/IP port.

CX-Server Middleware necessary for CX-One applications to communicate with OMRON components, such, such as PLCs, Display

Devices, and Temperature Control Units.

Communications Middleware Middleware necessary to communicate with CP1L CPU Units with built-in Ethernet port.

PLC Tools

(Installed automatically.)

A group of components used with CX-One applications, such as the CX-Programmer and CX-Integrator. Includes the following:

I/O tables, PLC memory, PLC Setup, Data Tracing/Time Chart Monitoring, PLC Error Logs, File Memory, PLC clock, Routing

Tables, and Data Link Tables.