DS200LDCCH1ALA Series Mark VIe Function Module

Part Number DS200LDCCH1ALA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VIe Function Module Availability In StockIS420UCSBH4A Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems View More IS220PSCAH1B Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems View More IS220PDIAH1B Module manufactured by General Electric as part of the Mark VI/VIe Series used in gas turbine sppedtronic control systems View Morenull

All drives of DIRECTO-MATIC 2000 series have this card installed in their drive cabinets. The board provides a series of functions, such as devices, motors and I/O control functions. This drive control and LAN communication board has four microprocessors to filter card signals. Digital and analog I/O sent to the board are received and filtered by the onboard drive control processor (DCP). Filter the local area network system supplied to the inverter through the onboard local area network control processor (LCP). The other two processors, namely motor control processor (MCP) and cooperative motor processor (CMP), work together. MCP provides initial processing space for digital I/O communication. If the calculation required for the signal exceeds the space capacity provided by MCP, CMP will supplement the processing capacity. The board is equipped with an attachable alphanumeric keyboard. Products purchased through AX Control will be transported in antistatic plastic bags. Only after reviewing all installation parameters provided by the manufacturer can the circuit board be removed. For a complete guide to wiring and installation of DS200LDCCH1ALA board, please refer to the series manual and device data sheet. Members of Mark V series, including this driver control LAN communication card, are provided with technical support by General Electric Company. According to these original instruction manual materials, I/O processing of DS200LDCC CH1LAPCB is realized by using one of the following bus systems:DLAN+ LAN protocol bus systemDLAN Small and Early Large Driver LAN ProtocolGenius interface board bus systemCPL interface board serial link bus systemDifferential bus system of C-Bus interface board