DS200TBQCG1A Manufacturer General Electric Country

Part Number DS200TBQCG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200TBQCG1A is an Analog Input Termination Module developed by GE. On the R1, R2, and R3 cores, it is at position 9. The TCQA board in each core is connected to via TBQC, which also connects the LVDT/R position inputs and the 4-20 mA inputs. The TCQA boards in the corresponding cores are read for the 200 mA outputs. Using hardware jumpers on the TBQC terminal board, the outputs can be set to have either a 20 mA maximum current or a 200 mA maximum current. It has two terminal blocks, each of which has 83 connections for signal wires. The Termination Board also comes with 15 jumpers, three 40-pin connections, and three 34-pin connectors. The terminals may accept 166 different signal wire connections in total. TB1 and TB2 are the IDs connected to the terminal blocks. Each terminal is given a specific numerical ID. DS200TBQCG1A Connections JBR writes the 420 mA input signals and reads the mA output signals to and from the TCQA board in the corresponding cores. JFR - Writes the relevant cores on the TCQA board using the LVDT/R position input signals. JBS/T - Typically not used. JFS/T - Typically not used. TEST. - Typically not used. Hardware Configuration for DS200TBQCG1A The mA input signals #1 through #15 are connected to DCOM by BJ1 through BJ15. The BJ16 and BJ17 connectors allow you to choose between a 20 mA or 200 mA maximum current output range for the two mA output signals.TERM BD(R-S-T) ANALOG I/O

DS200DCFBG1BLC

MS90376-12Y

VMIVME-7807RC

SERVOSTAR 310

IS200ERIOH1AAA

IS220PSCAH1A 336A4940CSP9

D20-PS LFDSC143-4000

IS200TDBTH6ABC

DS200SHVMG1AGE

IS2020RKPSG3A

DS200SHVMG1AFE

IC660ELB912

IS220PPRFH1A

IC698PSA350

HYDRAN M2

IC693PWR321

IS215VCMIH2BB IS200VCMIH2BCC