DS200TCDAG1B Mark V Speedtronic digital I/O board

Part Number DS200TCDAG1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockThe Mark V Speedtronic DS200TCDAG1B is a Mark V Speedtronic Digital I/O Board.The DS200TCDAG1B has one microprocessor and multiple PROM modules.All Digital inputs or contact inputs are terminated and conditioned by DS200TCDAG1B.The DS200TCDAG1B has one block that consists of ten LED lights and a pair of pin connectors.This I/O Board also has seven connectors.DIG. I/O BD

Technical specification of DS200TCDAG1BGeneral electric manufacturerSeries mark vPart number DS200TCDAG1BFunction description digital I/O boardFunctional abbreviationsPCB coating ordinary coatingFunctional revision 1AAbout DS200TCDAG1BThe DS200TCDAG1B printed circuit board product provided by General Electric Company is a widely supported PCB option, as a member of Mark V series turbine control system, as mentioned above. The Mark V series of trusted automation industry retailer General Electric Company is an outdated traditional product series, because General Electric Company has stopped its production since its initial release. In view of this, the DS200TCDAG1B PCB in the Mark V series of this personalized product page is one of the later developed product series, including the patented Speedtronic technology of General Electric. This particular DS200TCDAG1B PCB is better defined as a digital IO board or a digital input/output board through its official functional product description, which is the official functional description mentioned in the original Mark V series instruction manual. Although this DS200TCDAG1B PCB itself is definitely a digital IO board, it is not regarded as the original product with expected functions in the Mark V product series. This may be a single B-level functional product version of DS200TCDAG1 mother digital IO board lacking DS200TCDAG1B PCB.Hardware tips and specificationsLike any product included in the Mark V turbine control system series, DS200TCDAG1B PCB is unique in many necessary hardware components and specifications to obtain its expected application and function of Mark V automatic drive components. GE digital I/O board DS200TCDAG1B has a microprocessor and several programmable read-only memory (PROM) modules. It also includes one 10 led and two 50-pin connectors. GE digital I/O board DS200TCDAG1B is also equipped with 8 jumpers and 1 LED, which can be seen from the side of the board. The 50-pin connector in the product assembly transmits a signal, which is received by the board from other parts in the driver. Some signals carried by the 50-pin connector are transmitted to the GE digital I/O board DS200TCDAG1B through other boards and components. Various connector types available for DS200TCDAG1B PCB are defined as JP, JQ, JR, JO1, JO2, JX1 and JX2 connectors; The function of each connector is explained in detail in the original user manual of Mark V series attached above. It should be noted that JX1 and JX2 connectors defined by GE have exactly the same function and can be used interchangeably. Before finally deciding to buy DS200TCDAG1B Mark V series products for steam turbine control system, it must be noted that the original performance specifications and dimensions of the PCB have changed by using the version of Class B functional products.The 50-pin connector in the PCB assembly of DS 200 TC DAG 1B is connected to a ribbon cable, which consists of 50 individual wires, each of which is insulated from other wires to provide individual signals. Each strand consists of several wires, which are easily broken or disconnected from the connector at the end of the ribbon cable. If the connection with the ribbon cable is disconnected, the signal will also be lost to the DS200TCDAG1B PCB. You may need to run diagnostic tools to find the missing signal. Therefore, in order to avoid losing any signal, please follow some guidelines when handling ribbon cables. Pulling the ribbon cable to remove it from the circuit board may disconnect the wires inside it. Instead, use a plastic connector to disconnect it from the 50-pin connector on the board; Before removing the ribbon cable, please firmly hold the connector and pull it out directly from the connector. Do not disturb the wiring of the ribbon cable inside the drive.Frequently asked questions of DS200TCDAG1BWhere is DS200TCDAG1B located?The DS200TCDAG1B is located in the digital I/O cores < Q11 > and < Q51 >. DS200TCDAG1B processes digital contact input signals from DTBA and DTBB terminal boards and contact output signals from two TCRA boards.What connectors are there on DS200TCDAG1B?The DS200TCDAG1B has seven connectors. The connectors of DS200TCDAG1B are: JP, JQ, JR, JO1, JO2, JX1, JX2.What kind of jumper is used to terminate IONET on DS200TCDAG1B?Jumpers J2 and JBOY3 on DS200TCDAG1B are used to terminate the IONET resistor.

Technical specification of DS200TCDAG1BGeneral electric manufacturerSeries mark vPart number DS200TCDAG1BFunction description digital I/O boardFunctional abbreviationsPCB coating ordinary coatingFunctional revision 1AAbout DS200TCDAG1BThe DS200TCDAG1B printed circuit board product provided by General Electric Company is a widely supported PCB option, as a member of Mark V series turbine control system, as mentioned above. The Mark V series of trusted automation industry retailer General Electric Company is an outdated traditional product series, because General Electric Company has stopped its production since its initial release. In view of this, the DS200TCDAG1B PCB in the Mark V series of this personalized product page is one of the later developed product series, including the patented Speedtronic technology of General Electric. This particular DS200TCDAG1B PCB is better defined as a digital IO board or a digital input/output board through its official functional product description, which is the official functional description mentioned in the original Mark V series instruction manual. Although this DS200TCDAG1B PCB itself is definitely a digital IO board, it is not regarded as the original product with expected functions in the Mark V product series. This may be a single B-level functional product version of DS200TCDAG1 mother digital IO board lacking DS200TCDAG1B PCB.Hardware tips and specificationsLike any product included in the Mark V turbine control system series, DS200TCDAG1B PCB is unique in many necessary hardware components and specifications to obtain its expected application and function of Mark V automatic drive components. GE digital I/O board DS200TCDAG1B has a microprocessor and several programmable read-only memory (PROM) modules. It also includes one 10 led and two 50-pin connectors. GE digital I/O board DS200TCDAG1B is also equipped with 8 jumpers and 1 LED, which can be seen from the side of the board. The 50-pin connector in the product assembly transmits a signal, which is received by the board from other parts in the driver. Some signals carried by the 50-pin connector are transmitted to the GE digital I/O board DS200TCDAG1B through other boards and components. Various connector types available for DS200TCDAG1B PCB are defined as JP, JQ, JR, JO1, JO2, JX1 and JX2 connectors; The function of each connector is explained in detail in the original user manual of Mark V series attached above. It should be noted that JX1 and JX2 connectors defined by GE have exactly the same function and can be used interchangeably. Before finally deciding to buy DS200TCDAG1B Mark V series products for steam turbine control system, it must be noted that the original performance specifications and dimensions of the PCB have changed by using the version of Class B functional products.The 50-pin connector in the PCB assembly of DS 200 TC DAG 1B is connected to a ribbon cable, which consists of 50 individual wires, each of which is insulated from other wires to provide individual signals. Each strand consists of several wires, which are easily broken or disconnected from the connector at the end of the ribbon cable. If the connection with the ribbon cable is disconnected, the signal will also be lost to the DS200TCDAG1B PCB. You may need to run diagnostic tools to find the missing signal. Therefore, in order to avoid losing any signal, please follow some guidelines when handling ribbon cables. Pulling the ribbon cable to remove it from the circuit board may disconnect the wires inside it. Instead, use a plastic connector to disconnect it from the 50-pin connector on the board; Before removing the ribbon cable, please firmly hold the connector and pull it out directly from the connector. Do not disturb the wiring of the ribbon cable inside the drive.Frequently asked questions of DS200TCDAG1BWhere is DS200TCDAG1B located?The DS200TCDAG1B is located in the digital I/O cores < Q11 > and < Q51 >. DS200TCDAG1B processes digital contact input signals from DTBA and DTBB terminal boards and contact output signals from two TCRA boards.What connectors are there on DS200TCDAG1B?The DS200TCDAG1B has seven connectors. The connectors of DS200TCDAG1B are: JP, JQ, JR, JO1, JO2, JX1, JX2.What kind of jumper is used to terminate IONET on DS200TCDAG1B?Jumpers J2 and JBOY3 on DS200TCDAG1B are used to terminate the IONET resistor.

IC600CB527M

DS3800XTFP1E1C

IS200DSPXH1DBC

IC693MDL640

IS220PDIAH1A 336A4940CSP1

IS200EGPAG1BCA

IC698CRE030

IC693CPU341

IC697CPX772

IS210BPPBH2BMD

IS200ERDDH1ABA

IS220PDOAH1A

DS200SDCIG1ABA

IC698CPE020

531X303MCPBBG1

IC687BEM731-AB

IC697CPM925

VMIVME-4140

DS200DMCBG1AED

IS200VCRCH1B

IC687RCM711

IS200TVIBH2BBB

IC670ALG310-JA

IC697CHS790

IS210SAMBH2AA

DS200SHVMG1AFE

IC660ELB912

IS220PPRFH1A