DS200TCEAG1B Emergency overspeed board

Part Number DS200TCEAG1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark V Function Module Availability In StockDS200TCEAG1B is an Emergency Overspeed Board and is part of the GE Speedtronic Mark V gas turbine control systems. One microprocessor and much programmable read-only memory (PROM) modules are included in the General Electric Emergency Overspeed Board type DS200TCEAG1B. Three fuses, 30 jumpers, and a pair of bayonet connections are also included. The board keeps an eye on the drive for over-speed and flame detection trip conditions and shuts it down as needed. The bayonet connectors are used to link the board to the rest of the drive's components and boards. Before connecting the male bayonet connectors on the end of the wires to the female bayonet connectors on the board, take some time to think about it. To remove a bayonet connector, maintain one hand on the connector and the other on the board to prevent it from bending or sliding. Remove the bayonet connection from the board's female connector and set aside the cable until you're ready to connect it to the replacement board.EMERGENCY OVER SPEED

Technical specification of DS200TCEAG1B

General electric manufacturer

Series mark v

Part number DS200TCEAG1B

Function description Emergency overspeed board

Functional abbreviations

Assembly type general assembly

Version number 1 version

Mark v series group 1

About DS200TCEAG1B

The printed circuit board (PCB) of DS200TCEAG1B was originally developed as an emergency overspeed board in the control system series of the greater Mark V steam turbine. Mark V series is one of the newest members of a large number of labeled and named product series provided by general electric Speedtronic technology, which is especially suitable for wind, steam or gas turbine control systems and automatic drive components. The DS200TCEAG1B printed circuit board is not the original emergency overspeed board manufactured by General Electric Company for placing in Mark V steam turbine control system series. This will be a similarly named DS200TCEAG1 printed circuit board, which obviously lacks a single B-level functional product version provided by DS200TCEAG1B products.

Hardware tips and specifications

The DS200TCEAG1B emergency overspeed board has its own set of special hardware components and specifications, as shown in the original Mark V series instruction manual document. The DS200TCEAG1B emergency overspeed board of General Electric Company has a microprocessor and several programmable read-only memory (PROM) modules. It also contains 3 fuses, 30 jumpers and a pair of bayonet connectors. The DS200TCEAG1B board monitors the overspeed and flame detection tripping conditions of Mark V series drivers, and shuts down the drivers when appropriate. The bayonet connector in the emergency overspeed board assembly of DS200TCEAG1B is used to connect the board to other equipment and boards in the transmission; Before connecting these male bayonet connectors at the end of the cable to the female connectors on the board, some considerations need to be taken, which are explained in detail in the GE instruction manual materials. To remove the bayonet connector, hold the connector with one hand and fix the circuit board with the other hand to prevent it from bending or moving. Pull the bayonet connector out of the female connector on the board and put the cable aside until you are ready to connect it to the replacement board.

Several specific connectors and integrated circuits are integrated into the PCB assembly abbreviated as TCEA. The circuit of DS200TCEAG1B Mark V series printed circuit board has various diagnostic functions related to the stronger overspeed processing function of DS200TCEAG1B printed circuit board. Some of these integrated circuits include TCEA flame detection circuit, TCEA turbine overspeed circuit and TCEA automatic synchronization circuit. Each of these circuits is named according to their function in the larger DS200TCEAG1B printed circuit board and Mark V series automatic drive module. Various connectors available to users of DS200TCEAG1B emergency overspeed board include:

J7 PD core power distribution connector

JK TCEB board signal connector

JL TCTG board trip signal connector

JW TCEB board flame detection signal connector

JX1 and JX2 daisy-chained IONET connectors

Similar to the integrated circuits discussed above, all these connectors available in the DS200TCEAG1B printed circuit board assembly are described in terms of their factory printed terms and intended applications. All the hardware in the emergency overspeed board assembly of TCEA abbreviation should be protected by at least some thick protective layer provided by the normal PCB protective coating of DS200TCEAG1B PCB. Although various hardware products of the DS200TCEAG1B device are usually well protected, different software configuration options of the DS200TCEAG1B device are also well protected, because the software configuration of the DS200TCEAG1B device is mainly handled by the IO configuration editor of the DS200TCEAG1B product, which is the standard of the Mark V turbine control system series to which the DS200TCEAG1B product belongs.