DS200TCEAG1BTF Emergency Overspeed Board

DS200TCEAG1BTF is an Emergency Overspeed Board in the series of rotor control system of Mark V of General Electric (GE). The following are the details about this product:

Product overview:

DS200TCEAG1BTF is an emergency overspeed protection device for gas turbine, which is mainly used to monitor the speed of gas turbine, and automatically take measures to prevent damage when the speed exceeds the preset limit.

The board contains a microprocessor and several programmable read-only memory (PROM) modules for storing firmware and operating instructions.

Technical specifications:

Size: 16cm x 12cm x 16cm.

Weight: 0.8kg

Interface: includes three fuses, 30 jumpers and two bayonet connectors.

Protection function: The circuit is protected from voltage peak or other irregular voltages by three fuses (each fuse has a unique ID, such as FU1, FU2 and FU3).

Function description:

Speed monitoring: monitor the speed of gas turbine in real time, and trigger emergency stop protection when the speed exceeds the set threshold.

Flame detection: Monitor the flame detection signal and turn off the driver if necessary.

Diagnostic function: provide diagnostic test points for testing various functions of the circuit.

Installation and maintenance:

Installation: The board can be easily installed in the existing system and has good compatibility with GE control system.

Replacement: When replacing, it is necessary to ensure that the fuse of the same model and specification is used, and the fuse should be pulled out for at least 30 seconds before replacement to discharge the residual charge in the capacitor.

Scope of application:

DS200TCEAG1BTF is mainly used in industrial automation, robotics, textile machinery and other fields, providing fast response and high reliability.

Precautions:

When handling board cards, electrostatic damage should be avoided. It is recommended to wear a wrist strap to eliminate static electricity.

When replacing the fuse, you must use the same type and specification as the original fuse.

DS200TCEAG1BTF is a high-performance emergency overspeed protection board, which is widely used in gas turbines and other industrial control systems, and has the characteristics of fast response, high reliability and easy maintenance.