DS215DMCBG1AZZ03A DRIVER BOARD

Part Number DS215DMCBG1AZZ03A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS215DMCBG1AZZ03A is a Drive Board and is part of the GE Speedtronic Mark V gas turbine control system. There are five vertical cable connectors on this densely packed board (four male and one female). There are also three vertical header connectors, three stab-on connectors, and over twenty jumper switches. In the upper left quadrant, there is a reset switch that allows you to reset the board without turning it off first. The LED indicators tell the operator of the board's status during operation.

Technical specification of DS215DMCBG1AZZ03A

General electric manufacturer

Series mark v

Part number DS215DMCBG1AZZ03A

Function description DMCBG1 & FW

Functional abbreviations

PCB coating ordinary coating

Functional revision 1A

Functional revision 2Z

Art revision z

About DS215DMCBG1AZZ03A

DS215DMCBG1AZZ03A is a circuit board component manufactured by GE Company, which is used in MKV Speedtronic system. MKV is designed for the control of gas and steam turbine systems. Although MKV board components are no longer manufactured by original manufacturers as members of obsolete product series that are now discontinued, they can be found as repaired and fully tested units in AX Control. DS215DMCBG1AZZ03A is a driving board. Compared with the DS200 motherboard with the same name, it provides updated hardware and/or firmware. The DS215DMCBG1AZZ03A product is not a PCB with specific Mark V series functions originally developed, and the alphanumeric "A" attached to the functional product number of the DS215DMCBG1AZZ03A proves this. Although the greater Mark V series of DS215DMCBG1AZZ03A PCB is functionally obsolete, it is still well received by the automation industry market, because it is one of the newly developed Mark product series, adopting patented Speedtronic control system technology, which was first seen in the Mark I series launched in the late 1960s.

Hardware tips and specifications

DS215DMCBG1AZZ03A is a high-density circuit board with the following specifications:

Five vertical cable connectors. These include four male connectors and one female connector.

Three vertical connectors.

Two auxiliary boards. It includes a vertically mounted circuit board and a horizontally mounted circuit board. Both boards are located in the lower left corner.

Three plug-in connectors.

More than twenty jumper switches.

Reset switch located in the upper left quadrant.

LED indicator light.

Inductor coil.

Test point for checking circuit board voltage.

More than 55 integrated circuits. These include oscillator chip, field programmable gate array and EPROM chip for storing data.

Several fuse assemblies.

DS215DMCBG1AZZ03A uses a resistor network array, transistors and various capacitors, diodes and resistors. Use lettering, alignment marks and notches to mark the plate along its two edges. It is drilled in the corner of the board, in the center of the board, and there are extra holes along the edge of the board. For important information about handling and installation, please consult the technical support products originally provided by General Electric Company. This includes manuals and data sheets. Although the instruction manual materials originally developed for DS 215 DM CBG 1AZ03A products are definitely the main source of its hardware components and component specification information, because DS 215 DM CBG 1AZ03A products belong to the now obsolete Mark V turbine control system series, they are usually not available online. Given this attribution. The functional product number of DS215DMCBG1AZZ03A itself can be used as a supplementary source of hardware information of DS215DMCBG1AZZ03A board. Code specific details in a series of function naming blocks. For example, the functional product number of DS215 DM CBG 1AZ03A starts with the dual-function DS 215 label, which represents the special Mark V series components of the DS DS215DMCBG1AZZ03A PCB and its original manufacturing place in China. Some other related hardware details embedded in the functional product number of DS215DMCBG1AZZ03A include the acronym of DMCB function of the DS215DMCBG1AZZ03A board, the normal PCB coating style, the product grouping of group one Mark V series, the revision of main functions of Class A, and the optional software packages it accepts.