DS3800DECA General Electric LCI exciter control panel

Part Number DS3800DECA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800DECA is an LCI Exciter Control Board and is part of the GE Speedtronic Mark IV gas turbine control panel. One 20-pin ribbon cable and five trimmer resistors are included. There are also four jumpers, one potentiometer, and four test points on the GE LCI Exciter Control Board. Each jumper is given a unique ID that is silkscreened on the board's surface. Each jumper on the board has an ID next to it. The ID begins with the suffix BJ and ends with a number. BJ1, BJ2, BJ3, and BJ4 are some of the IDs. The GE LCI Exciter Control Board is designed to provide maximum versatility by adjusting the signal processing with a potentiometer and five trimmer resistors.LCI EXC CONTROL BD

The GE LCI Exciter Control Board DS3800DECA features 1 20-pin ribbon cable and 5 trimmer resistors. The GE LCI Exciter Control Board DS3800DECA1B1B also is populated with 4 jumpers, 1 potentiometer, and 4 test points.  Each jumper is assigned an ID that is silkscreened on the surface of the board. The IDs are adjacent to each jumper on the board. The ID include the suffix BJ and is followed with a number. Some of the IDs are BJ1, BJ2, BJ3, and BJ4. When the original board is installed in the drive by an installer, the jumpers are used to configure the board to process information to obtain the results required for the drive. The full description of the jumpers is included in the printed material shipped with the board.

When you replace the board, it is not necessary to review the description of each jumper and review the full explanation provided in the written material. Instead, view the old board and document how each jumper is set. Each jumper has only two possible positions. The jumper can cover pins 1 and 2 or pins 2 and 3. While you wear a wrist strap move the jumpers on the replacement board to match the jumpers on the old board.

The GE LCI Exciter Control Board DS3800DECA1B1B is designed to provide maximum flexibility by the use of 1 potentiometer and 5 trimmer resistors to adjust the signal processing. You must configure the replacement board to provide the same signal processing as the old board before you install it.

DS200DCFBG1BLC

MS90376-12Y

VMIVME-7807RC

SERVOSTAR 310

IS200ERIOH1AAA

IS220PSCAH1A 336A4940CSP9

D20-PS LFDSC143-4000

IS200TDBTH6ABC

DS200SHVMG1AGE

IS2020RKPSG3A

DS200SHVMG1AFE

IC660ELB912

IS220PPRFH1A

IC698PSA350

HYDRAN M2

IC693PWR321

IS215VCMIH2BB IS200VCMIH2BCC