DS3800DEPB1A1A General Electric LCI Excitation Control Board Mark IV

DS3800DEPB1A1A General Electric LCI Excitation Control Board Mark IV

Product Description P/N: DS3800DEPB1A1A DESCRIPTION / SPECIFICATIONS Description The DS3800DEPB1A1A is an LCI Excitation Control Board manufactured by General Electric for the Mark IV series. It is designed for use in industrial applications. The board features multiple integrated circuits and connectors. It is built to provide reliable excitation control within the Mark IV system. The DS3800DEPB1A1A lacks a faceplate and is equipped with various mounting holes to facilitate installation. It is essential for ensuring proper excitation control in turbine applications. Technical Specifications Condition New / Never Used Surplus Part Number DS3800DEPB1A1A Description LCI Excitation Control Board Manufacturer GE (General Electric) Series Mark IV Connectors 1 x 20-pin ribbon cable, 5 x 10-pin connectors Terminals 4 terminals for adding components Trimmer Resistors 2 trimmer resistors Information About DS3800DEPB1A1A The DS3800DEPB1A1A also features four terminals that can be used for adding additional components. Additionally, the board includes two trimmer resistors. The trimmer resistors allow for fine adjustments to the board's performance parameters. When handling the DS3800DEPB1A1A board, specific procedures must be followed to ensure the 20-pin ribbon cable is protected from damage. Initially, any 10-pin cables connected to the board should be disconnected and temporarily moved aside. Next, the 20-pin connector should be gently unplugged by grasping it with one hand. The four screws securing the board to the rack should then be removed while the board is held in place with the other hand. It is critical to avoid pulling on the board to disconnect the ribbon cable, as this could result in damage to the cable. The physical dimensions of the DS3800DEPB1A1A board are six inches in length and two inches in height. The drive's interior is specifically designed to accommodate the installation of this board, providing a designated location for secure and proper fitting.