DS3800HXPC CPU expansion card

Part Number DS3800HXPC Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800HXPC is a CPU Expander Card and is made to work as a CPU board and fits into the GE Speedtronic Mark IV gas turbine control system. The Mark IV system was designed to regulate gas/steam turbines and is capable of controlling all aspects of turbine systems. All four corners are factory drilled, with clips added in two for mounting options. There are 6 resistor network arrays in all. For voltage division or digital to analog conversion, resistor networks can be installed on the board (or vice versa.) On the middle right short edge of the board, there are two male connectors. 218A4637-P2 is the marking on both of these connectors. There are thirty-seven jumper switches on it. These are arranged in groups of 9, 8, 1, 1, 8, 4, 3, and 3 around the board. Some of these jumpers can be worn in a variety of ways. It features one female connector labeled 218A4553-1 A-mp 533002-1 along the left edge. Behind this connector, the board is numbered 2, then 10 to eighty in ten-digit increments. A total of 48 integrated circuits are included. Internal timer circuits, such as the Intel D8254 L4380686, as well as oscillators and DIP components, are included.CPU EXPANDER CD

About the DS3800HXPC

The DS3800HXPC is a printed circuit board (PCB) manufactured by General Electric. It is designed to fit within the Speedtronic/Mark IV series and to work as a CPU board. The Mark IV system was created for gas/steam turbine control and can control every aspect of turbine systems. With interconnected chipsets and built-in redundancies, the Mark IV is designed to maximize uptime by minimizing downtime caused by electronics failure.

The DS3800HXPC has these specifications:

It is factory drilled all four corners, with clips installed in two for mounting options.

It has six resistor network arrays. Resistor networks may be placed on the board for voltage division or for digital to analog conversion (or vice versa.)

It has two male connectors on the middle right short edge of the board. Both of these connectors are marked 218A4637-P2.

It has 37 jumper switches. These are situated around the board in groupings of 9, 8, 1, 1, 8, 4, 3, and 3. Some of these jumpers have several position options.

It has one connector (female) placed along the left edge marked 218A4553-1 A-mp 533002-1. The board is numbered behind this connector, 2 and then ten to eighty in increments of ten.

There are 48 integrated circuits. This includes internal timer circuits like the Intel D8254 L4380686 as well as oscillators and DIP components.

The board uses metal film resistors (ceramic covered.)

AxControl suggests referring to manuals or data sheets published by General Electric for proper installation guidelines for the DS3800HXPC. These publications and other technical support were provided by GE.

DS200DCFBG1BLC

MS90376-12Y

VMIVME-7807RC

SERVOSTAR 310

IS200ERIOH1AAA

IS220PSCAH1A 336A4940CSP9

D20-PS LFDSC143-4000

IS200TDBTH6ABC

DS200SHVMG1AGE

IS2020RKPSG3A

DS200SHVMG1AFE

IC660ELB912

IS220PPRFH1A

IC698PSA350

HYDRAN M2

IC693PWR321

IS215VCMIH2BB IS200VCMIH2BCC