DS3800NFLA General Electric Fan loss card

Part Number DS3800NFLA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800NFLA is a Fan Loss Card manufactured and designed by General Electric as part of the Mark IV Series used in GE Speedtronic Gas Turbine Control Systems. In a turbine control system, a Fan Loss Card (FLC) is a printed circuit board that monitors the status of the fan or blower that is used to cool the electronics within the control system. The FLC typically contains sensors and monitoring circuits that detect any changes in the fan's speed or function and can alert the control system to any problems. The FLC is an important component in the overall control system, as overheating of the electronic components can cause malfunctions or even damage to the turbine. By constantly monitoring the fan's status, the FLC helps to ensure that the system stays within safe operating parameters and can take appropriate actions if any issues arise. FEATURES: The features of a Fan Loss Card (FLC) in a turbine control system may vary depending on the specific design and manufacturer, but some common features include: Fan Monitoring: The FLC monitors the speed, temperature, and vibration of the cooling fan or blower. If the fan stops or malfunctions, the FLC can alert the control system to take appropriate actions. Alarms and Indicators: The FLC may have visual and audible indicators to alert operators to any fan-related issues. It may also send alarms to the control system or a monitoring station. Fault Diagnostics: The FLC can perform diagnostic tests on the fan and its associated circuits to detect faults or malfunctions. It may provide fault codes or other diagnostic information to aid in troubleshooting. Communication Interface: The FLC may have a communication interface, such as a serial port or Ethernet connection, to allow for remote monitoring and control.FAN LOSS CARD

The DS3800NFMC was created by General Electric. This product is a component of the Speedtronic Mark IV series which is in charge of turbine control. The DS3800NFMC is a fault finder circuit board.

Many important parts are featured on the DS3800NFMC. Thirty-eight integrated circuits take up a lot of space on the DS3800NFMC. A long connector port runs along the length of the left side of the DS3800NFMC. Users can take advantage of this port by connecting extra board or components with this port. Nine LEDs are aligned on the right side of the DS3800NFMC. The LEDs, also known as light-emitting diodes, emit a red glow when they are working. A group of 15 test points is located near the LEDs. Each test point is marked with the letters TP and they are named TP1 through TP15. Operators can use these test points to ensure that the DS3800NFMC is working the way it should. A variety of capacitors in various sizes and colors can also be found on the DS3800NFMC. Two mid-sized silver capacitors are on the right side of the DS3800NFMC. Near the upper edge of the board is a smaller silver capacitor. Many smaller capacitors which are banded in different colors are on the DS3800NFMC. An assortment of resistors is also included on the DS3800NFMC. There are resistors in many different sizes and colors. Several of the resistors have bands in different colors, while some of them are solid. Nineteen black round transistors marked with the letter Q are grouped in rows of 3 and 4 on the left half of the DS3800NFMC.

IC697MDL740

IC670PBI001

IC698CHS117C

DS200TCQAG1BHF

IS200AEPCH1ABC

IC697MDL250

IC697MDL250

760-P1-G1-S1-LO-A20-R

SR489-P5-LO-A20-E

IC670CHS001E

IC697MDL653

IS200VTCCH1CBB

VMIVME-4150