DS3800NGRD I/O data slave board

Part Number DS3800NGRD Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3800NGRD is a I/O Data Slave Board manufactured and designed by General Electrics. It is a part of the Mark IV Control System. In a gas turbine control system, an I/O (input/output) data slave board is a device that communicates with the main control system and manages the exchange of data between the control system and various sensors, actuators, and other devices in the turbine. The I/O data slave board acts as an interface between the control system and the physical components of the turbine, allowing the control system to monitor and control various parameters such as temperature, pressure, and speed. The board typically includes multiple input and output channels, each of which can be connected to a specific sensor or actuator. It also includes a microcontroller or other processing unit that manages the flow of data between the various channels and the main control system. Features High-speed Communication: Communicate with the main control system and the various sensors and actuators at high speeds to ensure that data is transmitted quickly and accurately. Multiple input/output channels: Multiple input and output channels to accommodate the various sensors and actuators used in the gas turbine system. Compatibility with various sensors and actuators: Compatible with a wide range of sensors and actuators to ensure that it can be used in different types of gas turbine systems. Robustness: Designed to withstand the harsh operating conditions of a gas turbine system, including high temperatures, vibrations, and electromagnetic interference. Real-time processing: Process data in real-time to ensure that the gas turbine system operates safely and efficiently. Diagnostic capabilities: Diagnostic capabilities that allow it to identify and report any problems with the sensors, actuators, or other components of the gas turbine system. Diagnostics A Mark IV annunciator drop is reserved to inform the operator of a diagnostic failure. The operator can enter the diagnostic alarm display through a soft switch on the alarm display to find the details of the failure. Off-line diagnostics consist of a series of operator initiated tests to verify input/output operations. Therefore, most of the off-line diagnostics can he used only when the turbine is not running. The exceptions are the tests on operator inputs and displays. An analog test module is required to implement tests 6 through 10 below. The following input/output areas are tested: Auxiliary display Operator's panel membrane switches Digital I/O cards Contact inputs Relay outputs Pulse rate inputs Vibration inputs Pressure inputs Thermocouple inputs Analog output cardI/O DATA SLAVE

Related models

DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200TBCAG1AAB RTD input terminal board DS200TBCBG1AAA RTD and 4-20ma input terminal board DS200TBQAG1ABB thermocouple terminal plate DS200TBQAG1ABB thermocouple terminal plate DS200TBQBG1ACB I/O terminal board 

DS200TBQBG1ACB I/O terminal board DS200TBQCG1AAA analog input/output terminal board DS200TBQCG1AAA analog input/output terminal board DS200TBQEG1BAA LM6000 analog terminal board DS200TBSAG1AAA serial communication terminal module DS200TCEAG1BTF emergency overspeed board GE DS200TCEAG1BTF emergency overspeed board GE DS200TCEAG1BTF emergency overspeed board GE DS200TCQEG2AED LM 6000 I/O processor DS200TCRAG2ABC relay output board

Related areas

China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

Product features

-Excellent and reliable high-performance EPDM material ensures higher electrical performance; Precise molding of housing ensures superior control of electrical stress;

-Quick and simple installation. The pre-expansion pipe adopts split tubular plastic support pipe, which is convenient to extract and reduces the error of on-site installation time;

-It is suitable for covering the entire cable cross-section range from 50 to 400mm2.