General Electric DS3800NTSA Printed circuit board

Part Number DS3800NTSA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockGeneral Electric Speedtronic Mark IV DS3800NTSA is a printed circuit board as a part of the Mark IV Series. Within the Mark IV series, the DS3800NTSA serves as a scanner board. With roll pins, two nylon extractor clips are fastened to the right corners of the board. 

Depending on whether the board is being installed or uninstalled, these clips serve as both a handle and a lever point. 

There are three PCB mating connectors on the DS3800NTSA. On the right edge, there are two 218A4637-P2 right-angled male connectors. On the opposite side of the board, there is an A-mp 27791-1 7733 218A4683-00l connector. Near the first two connectors, there are two test sites. Four potentiometers, one jumper, and twelve transistors are used in the DS3800NTSA. Carbon composite and metal film resistors are used in its material. Ceramic, polyester film, and other materials can be used as capacitors. Nine integrated circuits are present on the board. 

The twelve CP Clare mercury wetted contact relays are the most visible component on the DS3800NTSA (HGS2x 5040 218A4826 1.) Two parallel lines of six relays are used. The second and third relays of each row are connected with a board stiffener.SCANNER CD

DS200DCFBG1BLC

MS90376-12Y

VMIVME-7807RC

SERVOSTAR 310

IS200ERIOH1AAA

IS220PSCAH1A 336A4940CSP9

D20-PS LFDSC143-4000

IS200TDBTH6ABC

DS200SHVMG1AGE

IS2020RKPSG3A

DS200SHVMG1AFE

IC660ELB912

IS220PPRFH1A

IC698PSA350

HYDRAN M2

IC693PWR321

IS215VCMIH2BB IS200VCMIH2BCC