General Electric DS3820AIRA Analog I/O module

General Electric DS3820AIRA Analog I/O module

Part Number DS3820AIRA Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockDS3820AIRA is an Analog I/O Module and is part of the GE Speedtronic Mark IV gas turbine control system for industrial and steam turbines. Twenty-eight bright yellow capacitors, six huge white capacitors, and twenty-six little red tower-style capacitors make up the DS3820AIRA. A capacitor is a device that stores excess energy in an electromagnetic field to be used later. Five huge boxes and one smaller black box make up the module. Metal strips with screws go between the dark boxes. There are seventeen screws on the far left strip, twelve screws on the center strip, and seventeen screws on the far right strip. Around sixty resistors make up the DS3820AIRA. The resistors prevent energy from flowing freely across the board. The numerous colored bands that surround the resistors help to identify them. Each ring represents the amount of energy that each resistor can block. There are forty-one little yellow didoes on the DS3820AIRA. The diodes regulate the flow of electricity across the circuit board by allowing it to travel only in one direction. Three long male terminal ports with 32 metal prongs, seven short male terminal ports with ten metal prongs, and two medium-length male terminal ports with twenty metal prongs are available on the DS3820AIRA. The DS3820AIRA is connected to the surrounding circuit boards through these male terminal connectors.ANALOG I/O M

The DS3820AIRA is an analog I/O module for General Electric’s Mark IV Speedtronic line. The DS3820AIRA has twenty-eight bright yellow capacitors, six large white capacitors, and twenty-six small red tower style capacitors. A capacitor stores excess energy in an electromagnetic field for later use. The DS3820AIRA has five large box boxes and one smaller black box. In between the black boxes are metal strips with screws. The strip to the far left has seventeen screws, the middle strip has twelve screws and the strip to the far right has seventeen screws. The DS3820AIRA has around sixty resistors. The resistors restrict energy flow throughout the board. The resistors can be identified by the multiple colored rings around them. Each ring corresponds with how much energy each resistor can restrict. The DS3820AIRA has forty-one tiny yellow didoes. The diodes control the energy flow across the circuit board by allowing the energy to only flow in one direction. The DS3820AIRA has three long male terminal ports with thirty-two metal prongs, seven short male terminal ports with ten metal prongs, and two medium length male terminal ports that have twenty metal prongs. These male terminal ports are used to connect the DS3820AIRA with surrounding circuit boards. Each section of the DS3820AIRA is labeled with the proper alphanumeric code for the part. The DS3820AIRA is printed with General Electric’s emblem and the part number. The DS3820AIRA also has a small metal edged frame with pre-drilled places for screws or anchors to secure the circuit board in place.

IC697MDL740

IC670PBI001

IC698CHS117C

DS200TCQAG1BHF

IS200AEPCH1ABC

IC697MDL250

IC697MDL250

760-P1-G1-S1-LO-A20-R

SR489-P5-LO-A20-E

IC670CHS001E

IC697MDL653

IS200VTCCH1CBB

VMIVME-4150