DS3820DMCC General Electric Digital input module

Part Number DS3820DMCC Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockGE Speedtronic Mark IV DS3820DMCC is a Digital Input Module that helps remote monitoring for DIN rail. It is a sophisticated remote control system that provides the user comprehensive control options over a TCP/IP network. It has 8 relay outputs and 8 passive signal inputs for the DIN rail. For polling NO/NC devices, the device features 8 individually switchable relay outputs and 8 passive signal inputs. The remote I/O system can be expanded with plug-and-play sensors for ambient temperature, humidity, and air pressure, as well as leakage monitoring, via a sensor connection (RJ45). Modern security protocols such as SNMPv3, SSL, SSH, and IPv6 are supported in addition to communication via MQTT, Telnet, Radius, and Modbus TCP. It may be readily mounted on a DIN rail and quickly controls and monitors professional AV and IT installations. The smart monitoring system provides a wide range of control options for dependable device management and environmental monitoring. It's simple to incorporate into monitoring software. WOC has the largest stock of Speedtronic Mark IV control spares and we can repair your faulty DS3820DMCC with a warranty of 12 months.DIGITAL INPUT MODULE

About the DS3820DMCC

The DS3820DMCC module is a circuit board case unit that was made by General Electric. This device was created to be an important component in the GE Mark IV SPEEDTRONIC series, also by General Electric. This product is no longer being produced at this time; however, you can still most likely find the DS3820DMCC circuit board case unit within AX Control’s stock. Contact us via email or phone to speak to one of our staff members, confirm this product’s availability in our stock, and learn more about how to order this product, including our varied and convenient payment and shipping options.

The DS3820DMCC circuit board case unit was made so that it could house up to two circuit boards. These circuit boards that the DS3820DMCC module is meant to hold are also part of the GE Mark IV SPEEDTRONIC series, and therfore they were created so that they could control either steam or gas turbines. Therefore, these circuit boards are very important pieces of equipment and should be well protected by any means. The DS3820DMCC circuit board case unit is designed specifically for that. The outer shell is a metal material that can protect the contents inside of it from any significant hits or falls that might otherwise cause significant damage. The areas where the circuit boards are kept are evenly spaced between the other circuit board area and the walls. The circuit boards are held in place by two small arms on both ends of the DS3820DMCC circuit board case unit to keep them from falling out of the unit when being carried or something similar.