GE IC200PWR102 Advanced Power Supply Module

GE IC200PWR102 extended power supply module is an extended power supply module specially designed for GE Fanuc VersaMax series PLC. Its main function is to provide power support for the backplane of PLC, including network interface unit (NIU), input/output unit (I/O) and central processing unit (CPU). The following are the details about this module:

Input voltage range:

After the jumper is installed, the input voltage ranges from 85 to 132 volts alternating current (AC), with a nominal value of 120 volts.

When the jumper is not installed, the input voltage ranges from 176 to 246 volts AC, with a nominal value of 240 volts.

Output voltage:

The output of the main power supply is 5 volts direct current (DC).

The output of the extended power supply is 3.3 volts DC.

Output current:

The upper limit of total output current is 1.5 amps.

At 3.3 volts output, the maximum current is 1.0 amps.

At 5 V output, the maximum current is 1.5 amps.

Input power:

The input power is 27 watts.

Holding time:

The retention time of the module is about 20 milliseconds.

Protection function:

The module has short circuit and overload protection functions.

Installation method:

It can be directly connected to the backplane of PLC as the main power supply, and can also be installed on the power booster bracket as the booster power supply.

Size and weight:

The dimensions are 49 mm wide (19.3 inches), 133.4 mm high (5.25 inches) and 39.5 mm deep (1.54 inches).

It weighs about 0.4 kg (15.2 ounces).

Applicable scenarios:

It is suitable for the backplane power supply of VersaMax series PLC, especially in the scene where an additional 3.3 volt power supply is needed.

Other features:

The module supports operation in the frequency range of 47 to 63 Hz.

The output voltage has high stability and is suitable for the stable operation of industrial automation equipment.