IS200ACLEH1B Manufacturer General Electric Country

Part Number IS200ACLEH1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS200ACLEH1B is an Application Control Layer Module manufactured by General Electric. It is part of EX2100 control systems. It's a microprocessor-based master controller that handles multiple tasks over communication networks like Ethernet and ISBus. The ACL fits into two half-slots in a standard Innovation Series drive or EX2100 exciter board rack. The control cabinet houses the ACL and the board rack. The P1 connector (4-row 128-pin) plugs into the Control Assembly Backplane Board in drive applications (CABP). The ACL in the EX2100 exciter is mounted in the Exciter Backplane (EBKP). Hardware Features The ACL's integrated circuits provide the following features: Central processing unit (CPU) Peripheral component interconnect (PCI) controller Level 2 cache of 128 Kbytes 8 MB of dynamic random access memory (DRAM) 4 MB of flash memory basic I/O system (BIOS) High-speed Ethernet Bus target interface COM1 and COM2 serial ports Ethernet ISBus communication ports Software Features The hardware is identified and initialized by the Basic Input/Output System (BIOS). 

The BIOS directs all output display information to the COM1 serial port during initialization. During the initial boot sequence, the BIOS also supports serial loading of the operating system (compatible with the current GE loader) via the COM1 port. 

The GE extended BIOS handles the following tasks: Overwrites the boot interrupt to point to GE's extended BIOS Displays the CMOS settings via the COM1 serial port (accessible via the toolbox and setup utility) Supports an RS-232C download Initializes any GE-specific hardware Resets the ACL through RESDRV when needed via an I/O write Enables flash disk support and booting Connector Pin Signals To access individual pin signals on the ACLA board backplane connector P1, a custom extender board is required. These signals are not checked as part of standard in-service testing/troubleshooting procedures, and they are not described in this publication. PC/104 header signals are not defined either. The ACL faceplate contains user connectors. 

The following tables define the pin signals for these connectors: Table Connector 5 COM1/2 Interface Connectors 6 P3 Ethernet Interface Connector 7 ISBus ConnectorsCIRCUIT BOARD Gmail: yy4291644@gmail.com   Enterprise mailbox: ivy@kongjiangauto.com 

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy