IS200CABPG1B Manufacturer General Electric Country

Part Number IS200CABPG1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS200CABPG1B is a Control Assembly Backplane Board manufactured by General Electric as a part of the Mark VI series used in the gas turbine control systems. The IS200CABP Control Assembly Backplane (CABP) board is a multilayer printed wiring board that enables connectivity for printed wiring boards inserted into it as well as external signal interfaces. The number of boards installed depends on the power level and application of the Innovation Series drive to which the CABP board belongs. These boards are: IS200BAIA Bridge Interface Board (BAIA) IS215GBIA Auxiliary Genius Interface Module (GBIA), IS215PBIA Auxiliary Genius Interface Module (GBIA) IS200ACL Application Control Layer Board (ACL) or Profibus Interface Module (PBIA) Digital Signal Process Control Board (DSPX) IS200DSPX (Optional) Rack Power Supply Board IS200RAPA (RAPA) Interface board for the Bridge (FOSA) IS200BPI Drive Bridge Personality Interface Board (BPI) or IS200FOSA External interfaces such as user control inputs/outputs (I/O), four front panel meters, diagnostic/configuration tools, a front panel keyboard, four ISBus ports, and power supply inputs are also accessible via connectors. 

The CABP board is mounted to the Innovation Series board rack, which has mounting points for each board. A single IS200HFPA High-Frequency AC/Fan Power Supply Board powers the CABP board (HFPA). For the 48 V AC power, a twisted/shielded pair cable is used, and a separate isolated twisted pair cable is used for the 17 V AC power. These cables have a 1000 V DC isolation. The CABP board connects the isolated power returns to the control cabinet common (CCOM) either indirectly or directly via an impedance (resistor/capacitor). It also links DCOM and CCOM. Provisions are made for all cable shields (where appropriate) to be connected directly to the chassis. Each for CCOM and Chassis Ground, there are two application-specific stab-on connectors (GND). The mounting screws connect GND to the board rack chassis. A capacitor is used to connect CCOM and GND. The stab-on connections link the CABP board CCOM to the control cabinet CCOM. HARDWARE FEATURES Near the application cable entry into the cabinet are the terminal boards associated with the CABP board for user I/O. Two multi-conductor cables connect to these terminal boards, one for low voltage (less than 50 volts) and the other for high voltage (more than 50 volts). Board connectors are either individually keyed, utilize different connectors (96 pins versus 128 pins) for identical modules, or keep the same pin assignments so that modules can be swapped out without causing damage. The following are the normal board locations: Slot One - BAIA board Slot Two - DSPX board Slot Three - ACL_ board or GBIA/PBIA mod. Slot Four - BIC_ board Slot Five - BPI_ or FOSA boardCONTROL ASM IGCT BACKPLAN Please contact us. Gmail: yy4291644@gmail.com   Enterprise mailbox: ivy@kongjiangauto.com 

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy