IS200DAMBG1A Manufacturer General Electric Country

Part Number IS200DAMBG1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockThe IS200DAMBG1A is a Gate Driver Board manufactured and designed by General Electric as part of the Mark VI Series, used in GE Drive Control Systems. A gate driver board is an electronic circuit used to control the switching of power semiconductor devices, such as MOSFETs, IGBTs, or SiC devices. It delivers a low voltage signal to the gate of the power device, turning it on or off, and is designed to drive the gate capacitance quickly and efficiently. Gate driver boards are widely applied in power electronics applications such as motor drives, inverters, and power supplies. They typically provide high-current pulses with fast rise and fall times to minimize switching losses and enhance efficiency. Features It provides a convenient interface between a control rack interface and an IGBT power-switching device. The DAMA boards are 620 frame boards equipped with a CM1000HA-28H Powerrex IGBT and are designed with three boards per driveone for each phase leg. 

The device includes only one IGBT for the upper phase leg and one IGBT for the lower phase leg. The DAM_boards are directly connected to the IGBT collector terminals, gates, and terminals, as well as the BPIA Bridge Personality Interface board located in the control rack. Additionally, there are no test points, fuses, or configurable items on the board. Pin 1 is named GLIN, which functions as the lower gate signal. Pin 2 is designated as the lower common signal (LCOM), which corresponds to the emitter. Pins 3, 4, 8, and 9 are labeled NC (Not Connected). Pin 5 is designated as the lower collector signal and is labeled CL. Pin 6 is designated as the upper common signal (UCOM) (emitter). Pin 7 is labeled GUIN and functions as the upper gate signal, while Pin 12 is labeled CU and serves as the upper collector signal. Gate driver boards may include features such as overcurrent protection, overvoltage protection, undervoltage lockout, and fault detection to ensure the safe and reliable operation of the power device. 

They may also be designed to operate at high temperatures and in harsh environments, such as those found in automotive or industrial applications.GATE DRIVER CARD Please contact us. Gmail: yy4291644@gmail.com   Enterprise mailbox: ivy@kongjiangauto.com 

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-