IS200ESELH1A EX 2100e function module

IS200ESELH1A EX 2100e function module

Part Number IS200ESELH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series EX 2100e Function Module Availability In StockIS200ESELH1A is an Exciter Collector Card and is part of the GE Speedtronic Mark VI gas turbine control systems. It functions as a Power Circuit Board in a turbine management system. This board serves as an Exciter Collector, receiving six logic level gate pulse signals from the EMIO it is connected to. 

The signals are then distributed to the EGPA exciter gate pulse amplifier boards in the power conversion cabinet. 

In redundant systems, two ESEL boards are employed, one of which is operated by M1 and the other by M2. The board has a small front panel with three LED lights and is labeled with the board's identification number. The majority of the components include reference designators. The board comprises numerous integrated circuits, over 75 transistors, 95 capacitors, approximately 300 resistors, and a single bridge driver, as well as two backplane connectors.EX2100- SELECTOR CAR

IS200ESELH1A technical specificationControl panel typeESEL group 1Function acronym/abbreviation SELThe number of bridge drivers is oneNumber of ESEL boards required for redundancy control 2Other boards connect EMIO.About IS200ESELH1AIS200ESELH1A is an exciter selector board, which was once produced by General Electric Company under EX2100 series. When the board is used, it will receive six logic level pulse signals from the EMIO connected to it. The received signal will be sent out through a set of six cables, and then the signal will be distributed to the EGPA circuit board. If redundant control is used when using this board, two IS200ESELH1A models must be used.There are three different groups of ESEL boards, ESEL1, ESEL2 and ESEL3. Depending on the groups, there will be a certain number of bridge drivers, because this model is ESEL1 and only one bridge driver is needed. The ESEL model is an integral part of other boards operating in the EX2100 system. As mentioned above, the ESEL model sends the gate pulse signal to the EGPA board. Once the signal is received by the EGPA board, the signal will be used to control the SCR gate ignition.When installing and operating the IS200ESELH1A board, you can use two manuals. One is the GEH-6632 EX2100 excitation control user's guide. This manual is usually used for the EX2100 series, but it contains information about the ESEL board on page 48. Another manual used with this model is GEI-100456 IS200ESEL exciter selector board manual. Please contact us. Gmail: yy4291644@gmail.com   Enterprise mailbox: ivy@kongjiangauto.com 

Related models

0880001-01

104X905BA603

12A0-0103-A3

12HFA51A42H

12HGA11J52

269 PLUS-D/O-100P-125V

369-A200

369B1860G0026

369B1860G0030

369-C100

369-C101

369-HI-0-0-0-0

369-HI-0-M-F-E-0

369-HI-R-M-0-0-0-E

369-HI-R-M-0-E-0

369-HI-R-M-0-P-0-E

application area

Industries such as petroleum, coal, metal ore, nonmetal ore and wood;

Industries of basic materials, power and fuel.

Metal smelting and processing, coking and coke, chemistry, chemical raw materials, cement, wood-based panels and power, petroleum and coal processing industries;

Machinery and equipment manufacturing industry, metal structure, cement products, chemical fertilizer and pesticide industry.

Wind power generation, thermal power generation, hydropower generation, nuclear power generation and other energy sources; For example, thermal power in China is mainly distributed in the northern coal-producing areas of China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

About Xiamen kongjiang automation technology co., ltd:

Xiamen kongjiang automation technology co., ltd is a technology-based entity company established on may 11th, 2017, located in Xiamen, Fujian province. The company is mainly engaged in the sales of imported industrial control parts, electrical engineering design, installation, programming, debugging, construction and other businesses. The company has an experienced and well-trained technical team, which is committed to providing customers with services such as electrical automation system development, automatic upgrading and transformation of the original production line, energy-