IS200TAMBH1A General Electric Mark VI/VIe function module

Part Number IS200TAMBH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS200TAMBH1A is an Acoustic Monitoring Terminal Board for the Mark VI system developed by General Electric. The CCSA or a third-party charge amplifier provides a mV output to the TAMB. 

The TAMB provides power to the charge amplifier via a current limited +24V or -24V supply or from an external source. Aside from electro-magnetic transient suppression, the differential input signal is routed directly to the VAMB via an 18-twisted-pair cable to the front edge of the Versa Module Eurocard (VME) card. Third-party vendors such as Bentley Nevada, Vibro-meter, GE/Reuter-Stokes, and others are supported by the TAMB. Installation Each channel outputs current limited +24 V dc and +24 V dc power supplies. For the PCB sensors, a constant current source is connected to the SIGx line. When the signal is a logic-level low through a TAMB output, the input signal, CCSELx, is False. 

The output must be False (logic-level low) upon power-up, leaving the constant current output deselected until the configuration parameters are loaded. Each channel has a hardware jumper, JPx, where x is an even number, that allows you to choose between a current input, I IN, and a voltage input, V IN. The current input acts as a burden resistor for any 4-20 mA circuits connected to that channel, providing a 250 W load resistor. 

 Diagnostics The ID device on the TAMB terminal board is interrogated by the I/O board. The terminal board serial number, board type, revision number, and JR, JS, JT connector location are all encoded into a read-only chip. As part of the power-on diagnostics, this ID is checked.ACOUSTIC MONITORING

Related models

DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200TBCAG1AAB RTD input terminal board DS200TBCBG1AAA RTD and 4-20ma input terminal board DS200TBQAG1ABB thermocouple terminal plate DS200TBQAG1ABB thermocouple terminal plate DS200TBQBG1ACB I/O terminal board 

DS200TBQBG1ACB I/O terminal board DS200TBQCG1AAA analog input/output terminal board DS200TBQCG1AAA analog input/output terminal board DS200TBQEG1BAA LM6000 analog terminal board DS200TBSAG1AAA serial communication terminal module DS200TCEAG1BTF emergency overspeed board GE DS200TCEAG1BTF emergency overspeed board GE DS200TCEAG1BTF emergency overspeed board GE DS200TCQEG2AED LM 6000 I/O processor DS200TCRAG2ABC relay output board

Related areas

China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

Product features

-Excellent and reliable high-performance EPDM material ensures higher electrical performance; Precise molding of housing ensures superior control of electrical stress;

-Quick and simple installation. The pre-expansion pipe adopts split tubular plastic support pipe, which is convenient to extract and reduces the error of on-site installation time;

-It is suitable for covering the entire cable cross-section range from 50 to 400mm2.