IS200TEFVH1A Manufacturer General Electric Country Mark VI/VIe Function Module

Part Number IS200TEFVH1A Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI/VIe Function Module Availability In StockIS200TEFVH1A is an Electric Fuel Valve Gateway developed by GE. 

It is a part of Mark VIe control system. Electric Fuel Valve Gateway (PEFV) serves as an Ethernet gateway linking the Mark VIe I/O Ethernet network with an electric fuel valve interface module, known as the Digital Valve Positioner (DVP), manufactured by Woodward Controls. This module facilitates communication via the Ethernet Global Data (EGD) protocol. FEATURES The PEFV comprises a processor board standard for all Mark VIe I/O packs. It features two RJ45 Ethernet connectors- one connects to the I/O Ethernet network, and the other directly links to the DVP. Additionally, a 3-pin connector is used to supply power to the pack. The dual RJ45 connectors are essential for the PEFV's operation. The first connector integrates the PEFV with the Mark VIe I/O Ethernet network, ensuring seamless communication within the control system. The second connector directly interfaces with the DVP, enabling precise control and monitoring of the electric fuel valve. PEFV is powered through a 3-pin connector, which provides the necessary electrical input for its operations. This configuration ensures the gateway can perform reliably, maintaining efficient communication and control within the Mark VIe framework. INSTALLATION Securely Mount the Terminal Board - Begin by securely mounting the board in its designated location, ensuring it is firmly in place to provide a stable base for subsequent installations. Plug in PEFVs for Triple Modular Redundancy (TMR) - Directly plug three PEFVs into the terminal board connectors. This setup provides triple modular redundancy, enhancing the system's reliability and fault tolerance. Mechanically Secure the Packs - Mechanically secure the packs using the threaded inserts located adjacent to the Ethernet ports. These inserts should connect to a mounting bracket specific to the terminal board type. Adjust the bracket to ensure that no right-angle force is applied to the DC-37 pin connector between the pack and the terminal board. This adjustment is only required once during the product's lifetime. Connect Ethernet Cables - Plug one Ethernet cable into the I/O Ethernet network and connect the other Ethernet cable to the corresponding network connector on the Woodward DVP. The pack will operate with connections made to either port. If the connections are modified, the pack must be rebooted. Standard practice is to connect ENET1 to the network associated with the I/O Ethernet network. Apply Power - Power is applied to the connector on the side of the pack. It is not necessary to remove power from the cable before inserting the connector. The PEFV has an inherent soft-start capability that controls current inrush upon power application. Configure the PEFV - Configure the PEFV as necessary according to the system requirements and operational parameters. Ensure all settings are correctly applied to achieve optimal performance.T BOARD ELEC FUEL VA 

Related models

DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200STCAG1ABA Turbine Communication Board (including UCPBG6AFB) DS200TBCAG1AAB RTD input terminal board DS200TBCBG1AAA RTD and 4-20ma input terminal board DS200TBQAG1ABB thermocouple terminal plate DS200TBQAG1ABB thermocouple terminal plate DS200TBQBG1ACB I/O terminal board 

DS200TBQBG1ACB I/O terminal board DS200TBQCG1AAA analog input/output terminal board DS200TBQCG1AAA analog input/output terminal board DS200TBQEG1BAA LM6000 analog terminal board DS200TBSAG1AAA serial communication terminal module DS200TCEAG1BTF emergency overspeed board GE DS200TCEAG1BTF emergency overspeed board GE DS200TCEAG1BTF emergency overspeed board GE DS200TCQEG2AED LM 6000 I/O processor DS200TCRAG2ABC relay output board

Related areas

China, mainly using coal. Hydropower is mainly distributed in the source area of south China, which is rich in hydropower. The distribution of nuclear power is not very typical.

Power transmission, including AC power transmission and DC power transmission: For example, the largest power transmission project in China is the West-to-East Power Transmission Project.

Substation; Power distribution; Electricity, electrical machinery and equipment manufacturing.

These are the application fields of our products.

Product features

-Excellent and reliable high-performance EPDM material ensures higher electrical performance; Precise molding of housing ensures superior control of electrical stress;

-Quick and simple installation. The pre-expansion pipe adopts split tubular plastic support pipe, which is convenient to extract and reduces the error of on-site installation time;

-It is suitable for covering the entire cable cross-section range from 50 to 400mm2.