IS200VCCCH1B Can be used as a discrete input/output board.

IS200VCCCH1B Can be used as a discrete input/output board.

Part Number IS200VCCCH1B Manufacturer General Electric Country of Manufacture As Per GE Manufacturing Policy Series Mark VI Function Module Availability In StockIS200VCCCH1B is a Discrete Input/Output Board manufactured by General Electric as a part of the Mark VI series used in gas turbine control systems. Four terminal boards take discrete inputs, and the board controls relay outputs. The board is intended to be installed in a VME I/O rack. The front faceplate of the board is made up of LED components and various connecting components. These parts are clearly indicated. Two DC power supply, TP test points, resistors, capacitors, diodes, and over thirty transistors are all on the board's surface. There are various connectors on the board as well, including two backplane connectors and six vertical pin connectors. A daughterboard in the board's upper right corner is connected to one of these vertical pin connectors. The pin connection and four screw connections screwed into standoffs keep the board in place. A third backplane is added to the board via this daughterboard. FPGAs, CMOS static RAM, and SRAM are among the more than sixty integrated circuits found on the Discrete Input/Output Board.MARK VI CONTACT COMB

About IS200VCCCH1B

IS200VCCCH1B is a component of Mark VI board. MKVI is one of several gas/steam management systems issued by GE under the name of "Speedtronic".

IS200VCCCH1B can be used as a discrete input/output board. The board receives discrete inputs through four terminal boards and controls relay outputs. The board is designed to be installed in a VME I/O rack. The rack has two plugs (labeled as JBOY3 and J4) for connecting the terminal blocks TBCI and TRLY. IS200VCCCH1B is a double-slot board because it needs space to accommodate the daughter board of the board. If a single slot board is needed, it can be replaced by a VCRC board.

IS200VCCCH1B has a front panel consisting of LED components and several connector components. These components are labeled. The surface of the circuit board includes two DC power supplies, TP test points, resistors, capacitors, diodes and more than 30 transistors. The board also has multiple connectors, including two backplane connectors and several vertical pin connectors. One of these vertical pin connectors is connected to the daughter board located in the upper right corner of the board. The circuit board is fixed by pin connection and four screws screwed into the bracket. The daughter board adds a third backboard to the board. There are more than 60 integrated chips on IS200VCCCH1B, including FPGAs, CMOS static RAM and SRAM.

More information about IS200VCCCH1B can be found in data sheet, manual or refer to MKVI turbine control system guide (GE publication number GEH-6421). If you don't have this publication, AX Control will be happy to send a copy of relevant chapters with your order.