IS215VCMIH2C VME communication board GE Mark VI series

IS215VCMIH2C VME communication board GE Mark VI series

IS215VCMIH2C VME communication board is manufactured for Mark VI steam turbine control system series of General Electric Company.

IS215VCMIH2C technical specification

Functional abbreviation

Indicator led operation, fault, status, reset

Instruction GEH-6421

OEMGE energy company

System version 3 network version of TMR system

Weigh 1 pound

SeriesMark VI control system

The part number is 215VCMIH2C.

Product type VME communication card

Product type VCMI bus master controller

IS215VCMIH2C FAQ

When was the earliest release of IS215VCMIH2C and its Mark VI control system?

Mark VI is one of the last Speedtronic series products released by General Electric. This series of gas/steam turbine management systems was developed in various iterations from the late 1960s (MKI) to the 1990s (MKVI and MKVIe), and its main goal was to improve the efficiency of the steam turbine system through reliable management, good design and the best emerging technologies. IS215VCMIH2C was released during the production of Mark VI control system by GE Energy and GE Industrial Solutions.

What is involved in conformal PCB coating of IS215VCMIH2C device?

The conformal printed circuit board coating style of the IS215VCMIH2C product is a thin chemical application PCB coating, which extends to the entire basic circuit board of the IS215VCMIH2C product in detail.

About IS215VCMIH2C

IS215VCMIH2C printed circuit board modular component product was originally designed and produced by General Electric Company, and its specific function is to serve as VME communication board in the series of control systems of the greater Mark VI turbine. This is the Mark VI series of 215VCMIH2C products, and many other products in our new and renovated inventory. As you may have guessed, according to its complete extended series name, it has a series of functional applications in the control and management system of GE-compatible gas, steam and wind turbine automatic drive components. It's true that the Mark VI series of IS215VCMIH2C products are not surrounded by a large number of original online instruction manuals, although there are newly developed applications, because these materials are often deleted from the Internet by their original manufacturers because of copyright infringement.

Hardware tips and specifications

IS215VCMIH2C is designed as a VME communication card in the control system of Mark VI steam turbine, which is very important for the correct function of the whole system. VCMI VME communication board allows input/output (I/O) cards to communicate with other I/O cards installed on the VME backplane, I/O cards installed on the expansion rack, I/O backup protection module, triple redundant control module and main processor module. IS215VCMIH2C card is also widely called VME bus master controller. This PCB provides an interface for communication between I/O board and controller. It also serves as the communication interface of the system control network or IONet. Before making any final purchase decision on this IS215VCMIH2C VME communication board product, it must be understood that this IS215VCMIH2C product is actually not the original production equipment of its specific Mark VI turbine control system series functions, because this must actually be regarded as the IS215VCMIH2C mother VME communication board does not use the only C-level functional product version of this IS215VC MIH 2C product. Class C version of IS215VCMIH2C device is regarded as functional product version, because it changes the basic performance specifications and overall functions of the basic PCB of IS215VCMIH2C product without making concessions in durability or aesthetics.

The front panel of IS215VCMIH2C has four port connections. It includes an RS-232C serial port, a D-type plug connector and three IONet 10Base2 Ethernet ports. Each IONet connector is associated with three LED indicators labeled TX/RX/CD. The board has additional LED indicators, which are marked as status, fault, operation and 1, 2, 4 and 8 respectively. The former is located above the reset switch (button), while the latter is located directly below the serial port. Each control module in Mark VI system usually contains an IS215VCMIH2C. These unique VCMI cards are used to communicate with the main processor module through the application software of the control system. Because of the importance of VCMI module, it is suggested to keep extra spare parts on the shelf to avoid machine downtime.