PROSOFT MVI 69-PDP MV1 PROFIBUS MASTER DPV1 communication module

To get the most benefit from this User Manual, you should have the following skills:  Rockwell Automation® RSLogix™ software: launch the program, configure ladder logic, and transfer the ladder logic to the processor  Microsoft Windows: install and launch programs, execute menu commands, navigate dialog boxes, and enter data  Hardware installation and wiring: install the module, and safely connect PROFIBUS DPV1 and CompactLogix or MicroLogix devices to a power source and to the MVI69-PDPMV1 module’s application port(s)

System Requirements The MVI69-PDPMV1 module requires the following minimum hardware and software components:  Rockwell Automation CompactLogix processors or MicroLogix 1500 LRP processor, with compatible power supply and one free slot in the rack, for the MVI69-PDPMV1 module. The module requires 800 mA of available power.   Important: The MVI69-PDPMV1 module has a power supply distance rating of 2 (L43 and L45 installations on first 2 slots of 1769 bus). Important: For 1769-L23x processors, please make note of the following limitations.  1769-L23-QBFC1B = 800 mA at 5 Vdc (One MVI69-PDPMV1 will use all 800 mA of available power. No other modules can be used with an MVI69 module connected to this processor.)  1769-L23E-QB1B = 1000 mA at 5 Vdc (One MVI69-PDPMV1 will use 800 mA of available power. One other module can be used on this rack provided it consumes less than 200 mA at 5 Vdc.)  1769-L23E-QBFC1B = 450 mA at 5 Vdc (No MVI69 module can be used with this processor.)    Rockwell Automation RSLogix 5000 (CompactLogix) or RSLogix 500 (MicroLogix) programming software  Rockwell Automation RSLinx communication software  Pentium® II 450 MHz minimum. Pentium III 733 MHz (or better) recommended    Supported operating systems: o Microsoft Windows XP Professional with Service Pack 1 or 2   o Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3 o Microsoft Windows Server 2003    128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended    100 Mbytes of free hard disk space (or more based on application requirements)    256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color 1024  768 recommended)    CD-ROM drive  HyperTerminal or other terminal emulator program capable of file transfers using Ymodem protocol.

Package Contents The following components are included with your MVI69-PDPMV1 module, and are all required for installation and configuration.

Installing ProSoft Configuration Builder Software You must install the ProSoft Configuration Builder (PCB) software to configure the module. You can always get the newest version of ProSoft Configuration Builder from the ProSoft Technology website. To install ProSoft Configuration Builder from the ProSoft Technology website 1 2 3 4 5 Open your web browser and navigate to http://www.prosoft technology.com/pcb Click the DOWNLOAD HERE link to download the latest version of ProSoft Configuration Builder.   Choose SAVE or SAVE FILE when prompted.   Save the file to your Windows Desktop, so that you can find it easily when you have finished downloading.   When the download is complete, locate and open the file, and then follow the instructions on your screen to install the program. If you do not have access to the Internet, you can install ProSoft Configuration Builder from the ProSoft Solutions Product CD-ROM, included in the package with your module. To install ProSoft Configuration Builder from the Product CD-ROM 1 2 3 4 Insert the ProSoft Solutions Product CD-ROM into the CD-ROM drive of your PC. Wait for the startup screen to appear. On the startup screen, click PRODUCT DOCUMENTATION. This action opens a Windows Explorer file tree window.   Click to open the UTILITIES folder. This folder contains all of the applications and files you will need to set up and configure your module. Double-click the SETUP CONFIGURATION TOOL folder, double-click the PCB_*.EXE file and follow the instructions on your screen to install the software on your PC. The information represented by the "*" character in the file name is the PCB version number and, therefore, subject to change as new versions of PCB are released.

Setting Jumpers The Setup Jumper acts as "write protection" for the module’s flash memory. In "write protected" mode, the Setup pins are not connected, and the module’s firmware cannot be overwritten. Do not jumper the Setup pins together unless you are directed to do so by ProSoft Technical Support.   The following illustration shows the MVI69-PDPMV1 jumper configuration.

1 Installing the Module Before you attempt to install the module, make sure that the bus lever of the adjacent module is in the unlocked (fully right) position. Warning: This module is not hot-swappable! Always remove power from the rack before inserting or removing this module, or damage may result to the module, the processor, or other connected devices.

2 Move the module back along the tongue-and-groove slots until the bus connectors on the MVI69 module and the adjacent module line up with each other.

3  Push the module’s bus lever back slightly to clear the positioning tab and move it firmly to the left until it clicks. Ensure that it is locked firmly in place.Align the module using the upper and lower tongue-and-groove slots with the adjacent module and slide forward in the direction of the arrow.

4 Push the module’s bus lever back slightly to clear the positioning tab and move it firmly to the left until it clicks. Ensure that it is locked firmly in place. Close all DIN-rail latches.

5 Press the DIN-rail mounting area of the controller against the DIN-rail. The latches will momentarily open and lock into place.