ADLINK Multi-Function DAQ PCI-9222/9223

Multi-Function DAQ

PCI-9222/9223

16/32 -CH 16-Bit 250/500 KS/s Multi-Function DAQ Cards with Encoder Input

Key Features

Programmable gains for analog input: ±10V, ±5V, ±2.5V, ±2V, ±1V, ±500mV, ±250mV

2-CH 16-bit simultaneous analog outputs, supporting up to 1 MS/s update rate

Programmable function I/O, supporting TTL DIO, 2MHz high-speed DIO, timer/counter, and PWM outputs

2-CH 4 MHz encoder inputs, supporting AB phase, and CW/CCW

Dedicated DMA channels for A/D, D/A, and high-speed DIO

External digital trigger for A/D, D/A, and high-speed DIO

Auto-calibration

Recommended for new applications

The ADLINK PCI-9222/PCI-9223 is a 16-bit, 16/32-CH, 250/500 KS/s high performance DAQ card with 8 different input ranges. 

It also features 2-CH 16-bit analog outputs capable of a 1 MS/s update rate, 2-CH encoder inputs, and programmable function I/O.

 The software-programmable function I/O supports a variety of applications, including TTL digital I/O, high-speed DIO, general-purpose timer/counter, pulse generation, and PWM output.

 Analog input, analog output, and function I/O at full speed simultaneously, and multiple cards can be synchronized through the SSI (System Synchronization Interface) bus if users need more channels than a single board can provide. 

Ideal for mixed-signal tests, laboratory research, and factory automation, PCI-9222/PCI-9223 is the best single-board solution on the market providing the best integration capability of multiple tasks with high performance and an affordable price

Specifications

Note:

(1) The function  I/O and encoder inputs share the same I/O pins of the PCI-9221. Only one of these modes can be selected.

(2) Dedicated

Ordering Information

■ PCI-9221

2-CH 16-Bit 250 kS/s Multi-Function DAQ

Card with Encoder Input

■ PCI-9222

16-CH 16-Bit 250 kS/s Multi-Function DAQ

Card with Encoder Input

■ PCI-9223

32-CH 16-Bit 500 kS/s Multi-Function DAQ

Card with Encoder Input

Model Name PCI-9221 PCI-9222 PCI-9223

Resolution 16 Bit

Number of channels 16 SE/ 8 DIFF 16 SE/ 8 DIFF 32 SE/ 16 DIFF

Maximum sampling rate

(single channel)

250 kS/s 250 kS/s 500 kS/s

Programmable gain 1. 5.10. 25 1. 2. 4. 5. 8. 10. 20. 40 1. 2. 4. 5. 8. 10. 20. 40

Input range ±5 V, ±1 V, ±500 mV, ±200 mV ±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V,

±1 V, ±500 mV, ±250 mV

±10 V, ±5 V, ±2.5 V, ±2 V, ±1.25 V,

±1 V, ±500 mV, ±250 mV

Offset error ±0.7 mV typical, after calibration

Gain error ±0.015% of FSR, after calibration

FIFO buffer size 1 k samples

Trigger sources Software, external digital Software, external digital, SSI

Trigger mode Post trigger Post trigger, retrigger, gate trigger

Input coupling DC

Overvoltage protection ±10 V Continuous ±30 V

Input impedance High impedance > 1 GΩ

Data Transfer Polling, scatter-gather DMA

Number of channels 2 voltage outputs

Resolution 16-Bit

Maximum update rate 1.25 kS/s (static) 1 MHz (simultaneous update)

FIFO-512

Output range ±5 V ±10 V

Output driving capacity ±5 mA

Slew rate 0.014 V/μs 20 V/μs

Setting time (0.1% of full scale) 1396 μs 2.6 μs

Offset error ±1 mV

Gain error ±0.02% FSR ±0.01% FSR

Rising time 390 μs 0.67 μs

Falling time 395 μs 0.705 μs

Mode Digital I/O(1) , General Timer/

Counter(1),Pulse Generation(1)

Digital I/O, General Timer/Counter,Pulse Generation

Digital I/O 8 DI/4 DO (5 V TTL level) 16 DO (3.3 V TTL Level) / 16 DI (3.3 V or 5 V TTL Level)

General Timer/Counter Two 32-Bit, Base clock: 40 MHz,

external to 10 MHz

Four 32-Bit, Base clock: 80 MHz, external to 10 MHz

Pulse generation Two PWM outputs (Modulation

frequency: 0.005 Hz to 5 MHz;

Duty cycle: 1%-99%)

Four PWM outputs (Modulation frequency: 0.01 Hz to 5 MHz;

Duty cycle: 1%-99%)

Number of channels 2(2)

Encoder type CW/CCW encoder, x 1 AB phase encoder, x 2 AB phase encoder, x 4 AB phase encoder

PCI Bus 5 V and 3.3 V universal PCI bus

Auto-calibration Yes

I/O Connector One 37-pin D-Sub connector Two 68-pin SCSI-VHDCI female

Operation temperature 0˚C to 45˚C (32˚F to 113˚F) 0˚C to 55˚C (32˚F to 131˚F)

Storage temperature-20˚C to 80˚C (-4˚F to 176˚F)-20˚C to 70˚C (-4˚F to 158˚F)

Humidity 5 to 95% non-condensing

Power requirements +5 V 1A typical,+12 V 100mA

typical,-12 V 100mA typical

+5 V 1.2 A typical, +12 V 760 mA typical, -12 V 50 mA typical

Dimensions 120 mm x 87 mm (4.68" x 3.39") 175 mm x 107 mm (6.82" x 4.17")(not including connectors)