PEB02 Binary Input Moudle PEB 02 H&B Contronic

PEB02 Binary Input Moudle Manufacturers ABB, Hartmann & Braun Model(s) ABB H&B Contronic, ABB H&B Contronic P Estimated Shipping 

Size Dimensions: 5.0" x 2.0" x 10.0" (12.7 cm x 5.1 cm x 25.4 cm) 

Weight: 0 lbs 14.1 oz (0.4kg ) PEB 02

For the official manual of ABB H&B Contronic binary input module, please refer to the following information:

Model and specification:

The module of model 8VZZ004870L0325 has at most 16 binary input terminals, and the conductor cross-sectional area of each terminal is 1.5 mm². In addition, the module also includes 8 diode outputs and 8 combined input/output terminals.

2VAA008147R325 module is a remote module on CS31 system bus, which has 16 binary channels and meets IP65 protection level.

Interfaces and connections:

The module communicates through CS31 system bus, and the bus connector is electrically isolated from other components of the module.

The reference potential of the input/output terminal is 24/25 (negative pole of power supply voltage, signal name M).

Diagnosis and indication:

The module is equipped with 33 LED indicators for displaying operation status and error messages.

Diagnostic functions include LED indication of bus error, overload and power supply.

Installation and address setting:

The address setting is performed through the DIL switch located under the slide switch on the right side of the right module.

The module can be fixed on the back wall or installed on a horizontal surface by screws.

Other features:

The module has overload and short circuit protection functions.

The output part adopts switching transistor with rated load capacity of 2A.

The above information is mainly based on the summary of and provides detailed information about the basic specifications, interfaces, diagnostic functions and installation methods of ABB H&B Contronic binary input module.