Hirschmann (Belden) RS20-1600M2M2SDAEHC09.1.00 DIN-rail managed industrial Fast Ethernet switch

Hirschmann (Belden)  RS20-1600M2M2SDAEHC09.1.00 DIN-rail managed industrial Fast Ethernet switch

Hirschmann (Belden) RS30-1602O6O6TDAPHC09.1.00 is an 18-port DIN-rail managed industrial Ethernet switch from the OpenRail RS30 family.

 Designed for high-density, mission-critical field environments, it combines 16 Fast Ethernet copper ports for local device access with 2 Gigabit SFP uplink slots for high-speed fiber backhaul.

Equipped with Professional (P) Layer 2 firmware (v09.1.00), extended temperature tolerance (-40 °C to +70 °C), and conformal coating (HC), this unit provides maximum protection against harsh chemical and moisture environments.

1. Product Introduction / Overview

Manufacturer: Hirschmann / Belden

Product Line: OpenRail RS30 Series (Managed Layer 2 Switch)

Model Code: RS30-1602O6O6TDAPHC09.1.00

Port Count: 18 total ports (16 × Fast Ethernet + 2 × Gigabit SFP Uplinks)

Software Version: HiOS / Software Release 09.1.00 (Professional Layer 2)

Key Capabilities: Designed for factory automation, intelligent transportation, energy substations, and marine applications requiring high port density, ring redundancy, and resistance to environmental contaminants.

2. Technical Parameter List

3. Product Features / Core Advantages

Conformal Coating (HC): Printed circuit boards are treated with a protective conformal coating, offering long-term reliability against high humidity, salt spray, airborne dust, and corrosive gas environments.

Ultra-Fast Redundancy: Supports HIPER-Ring and MRP (Media Redundancy Protocol) for sub-20ms failover recovery in critical ring topologies.

Dual Gigabit SFP Fiber Uplinks: Flexible optical connectivity across single-mode or multi-mode fiber via standard M-SFP modules for long-distance link backhaul.

Industrial Hardening: Fanless design with an extended operating temperature range of -40 °C to +70 °C.

Zero-Touch Device Replacement: Auto-Configuration Adapter (ACA21-USB) support allows quick backup and restoration of switch configuration without a PC during field maintenance.

4. Model Classification & Naming Breakdown

The code RS30-1602O6O6TDAPHC09.1.00 decodes according to Hirschmann’s OpenRail nomenclature:

RS30 - 16 02 - O6 O6 - T - D - A - P - HC - 09.1.00

│ │ │ │ │ │ │ │ │ │ └── Firmware Release (v09.1.00)

│ │ │ │ │ │ │ │ │ └────── Conformal Coating (Harsh Condition)

│ │ │ │ │ │ │ │ └────────── Software Level: Professional

│ │ │ │ │ │ │ └────────────── Approvals: CE, cUL508. Class 1 Div 2

│ │ │ │ │ │ └────────────────── Housing: Standard DIN Rail Mount

│ │ │ │ │ └────────────────────── Temp Range: Extended (-40°C to +70°C)

│ │ │ │ └────────────────────────── Uplink 2 Port: 1x Gigabit SFP Slot

│ │ │ └───────────────────────────── Uplink 1 Port: 1x Gigabit SFP Slot

│ │ └────────────────────────────────── Uplink Count: 2x Gigabit Ports

│ └───────────────────────────────────── Downlink Count: 16x Fast Ethernet Ports

└──────────────────────────────────────────── Family: OpenRail RS30 Managed Switch

5. Environmental Tolerance Conditions

6. Installation Method

DIN Rail Mounting

Hook the top latch of the switch housing onto the upper edge of the 35 mm DIN rail.

Push the lower rear of the switch toward the DIN rail until the locking clip snaps into place.

[Top Clip] ──► ┌──────────┐

│Hirschmann│

│ RS30-16 │

[DIN Rail] ──► ╞══════════╡

│ Switch │

[Release Clip] ──► └────┬─────┘

▼ (Pull down to remove)

Power & Grounding Connection

Protective Ground: Connect a grounding conductor to the chassis PE screw before powering the unit.

Terminal Block Wiring: Connect the primary power supply (12/24/48 V DC) to $+V1/-V1$ and optional redundant power to $+V2/-V2$ on the 6-pin terminal block.

7. Operating Instructions

Default Network Access

Default Management IP: Configurable via BOOTP/DHCP or local terminal connection.

Web UI / CLI: Access management via HTTPS or SSH using the IP address.

Serial Access: Connect an RJ11 cable to the front V.24 interface using serial parameters: 9600 Baud, 8 Data bits, 1 Stop bit, No Parity.

Front Panel Diagnostics

8. Google Web Indexing Guidelines

To make this product datasheet discoverable on search engines, implement the following SEO best practices:

Title Tag & Metadata:

Title: HIRSCHMANN RS30-1602O6O6TDAPHC09.1.00 Managed Industrial Switch Specs

Meta Description: Technical specifications and manual for Hirschmann RS30-1602O6O6TDAPHC09.1.00 managed 18-port DIN-rail switch with conformal coating and 2 Gigabit SFP ports.

Structured Product Markup (JSON-LD):

JSON

{

"@context": "https://schema.org/",

"@type": "Product",

"name": "Hirschmann RS30-1602O6O6TDAPHC09.1.00",

"description": "Industrial OpenRail 18-port Managed Switch with 16 Fast Ethernet ports, 2 Gigabit SFP slots, extended temperature range, and conformal coating.",

"mpn": "RS30-1602O6O6TDAPHC09.1.00",

"brand": {

"@type": "Brand",

"name": "Hirschmann"

}

}

Indexing Submission:

Add the webpage URL to your XML Sitemap file (sitemap.xml).

Submit the URL directly to Google Search Console using the URL Inspection Tool to request immediate crawling.