HIRSCHMANN RS30-1602OOZZSDAEHC09.1.00 DIN-rail-mounted managed Layer 2 Ethernet switch

HIRSCHMANN RS30-1602OOZZSDAEHC09.1.00

Product Introduction / Overview

The Hirschmann RS30-1602OOZZSDAEHC09.1.00 is an industrial-grade,

DIN-rail mounted managed Layer 2 Ethernet switch engineered by Hirschmann (a Belden brand) for mission-critical automation networks.

Designed to withstand harsh industrial environments, this compact OpenRail series switch offers high reliability, extensive network redundancy, and advanced security management features.

Technical Parameter List

Product Features / Core Advantages

High-Density Port Layout: Combines 16 Fast Ethernet ports for localized equipment with 2 Gigabit SFP fiber optic uplinks for high-speed trunk connections over long distances.

Industrial Redundancy: Supports Media Redundancy Protocol (MRP), Rapid Spanning Tree Protocol (RSTP), and Ring Redundancy to ensure zero-loss failover in critical loop topologies.

Dual Power Redundancy: Features redundant DC power terminals with an integrated fault signaling contact relay to alert operators in case of power failure.

Comprehensive Network Management: Full configuration capability via Web Interface, Command Line Interface (CLI), SNMP (v1/v2c/v3), and Industrial HiVision network management software.

VLAN & Traffic Optimization: Advanced Quality of Service (QoS), VLAN tagging (802.1Q), IGMP Snooping, and port security protocols to prevent network congestion.

Model Classification (Breakdown of Model Structure)

RS30: Rail Switch Series with 2 Gigabit Uplink ports.

16: Includes 16 Fast Ethernet downlink ports (10/100 Mbps).

02: Includes 2 Gigabit uplink slots.

OO (O6/O6 SFP): SFP slot configuration for flexible Gigabit transceivers (Fiber Optics).

ZZ: Fast Ethernet interface type (standard copper RJ45).

SD: Standard temperature range with DIN rail mounting chassis.

AE: Enhanced Management Software feature set.

HC: Hirschmann Industrial Classic Chassis / Standard Configuration.

09.1.00: Preset factory firmware software version.

Environmental Tolerance Conditions

Operating Temperature: 0°C to +60°C (Standard industrial range).

Storage / Transport Temperature: -40°C to +70°C.

Relative Humidity: 10% to 95% (Non-condensing).

Electromagnetic Compatibility (EMC): High immunity to electrostatic discharge (ESD), surge voltages, and electrical fast transients (bursts) per EN 61000-6-2 standards.

Mechanical Stability: High vibration and shock resistance (IEC 60068-2 standards).

Installation Method

DIN Rail Mounting: Hook the upper locking mechanism onto the standard 35 mm DIN rail (EN 50022) and press the bottom downward until the snap-in spring securely latches onto the rail.

Grounding: Connect a low-impedance ground wire to the dedicated grounding screw on the device frame prior to connecting signal cables.

Power Wiring: Wire redundant power supplies to the plug-in terminal block (+24V / 0V for Power Input 1 and Power Input 2).

SFP & Cable Installation: Insert required SFP optical modules into the Gigabit ports until they lock, then insert RJ45 network cables until the tab clips into place.

Operating Instructions

Power-On Sequence: Apply power to either or both redundant inputs. The system LED status indicator will turn green once boot-up completes.

Initial IP Assignment:

Connect a PC via RJ45 or terminal console cable.

Use the Hirschmann HiDiscovery tool or BOOTP/DHCP server to detect the switch MAC address and assign an initial IP address.

Web Management Access: Open a browser, navigate to the assigned IP address, log in with default credentials, and immediately update the administrative password.

Configuration Backup: Utilize an optional Auto-Configuration Adapter (ACA) plugged into the USB/RJ11 service port to auto-save configuration profiles for quick replacement.