2VAA008150R325 ABB H&B Contronic

2VAA008150R325    ABB H&B Contronic    

The outputs

 employ switching transistors,  have a rated load capability of 2 A and  are overload and short–circuit proof.

The module is mounted with screws. There are bore holes available for both mounting on a rear wall or on a horizontal surface.

The CS31 system bus connection is electrically isolated from remaining module components.

The module offers diagnosis functions (see chapter ”Diagnosis and displays”).

Displays and connections at module housing

16 yellow LEDs for displaying the signal statuses of the outputs

LEDs ”Bus Error”, ”Overload” and ”Supply” indicating of operating conditions and errors (see section ”Diagnosis and displays”) CS31 bus connector (input)

CS31 bus connector (output)

16 connectors for the outputs

PG11 cable gland for the 24 V DC power supply

The terminals for 24 V DC and PE are located under a removable cover. It is accessible from the top of the module. The DIL switch for setting the module address is also under the cover.

Labelling fields

Bore holes for mounting (see also ”Dimensioned drawing” at the end of this description)

Electrical connection

The following figure shows all details necessary for the electrical connection.

3BUR000101R1

TC530 DCN T-Box

3BUR000118R15

TK510 Cable Assembly DCN 15m, 49 ft

3BUR000118R3

TK510 Cable Assembly DCN 3m, 10 ft

3BUR000546R1

TC530K01 DCN T-Box w/Interface Cable, 3m

3BUR000547R1

TC532K01 Fiberoptic DCN T-Box with cable

3BUR000597R1

CI540K01 Redundant S100 I/O Interface

3BUR000598R1

CI560K01 Redund TRIO Interface Submodule

3BUR000699R1

SX558 Power Distr. Unit

3BUR000737R1

SA167K09 RM500V1 Power 120V/25A/2,7m

3BUR000738R1

SA161K07 Power Supply for I/O Subrack 2

3BUR000739R1

SA167K10 Power Supply for I/O Subracks