2VAA008151R325 ABB H&B Contronic

2VAA008151R325    ABB H&B Contronic    

The outputs

 employ switching transistors,  have a rated load capability of 2 A and  are overload and short–circuit proof.

The module is mounted with screws. There are bore holes available for both mounting on a rear wall or on a horizontal surface.

The CS31 system bus connection is electrically isolated from remaining module components.

The module offers diagnosis functions

Displays and connections at module housing

8 yellow LEDs for displaying the signal statuses of the outputs

LEDs ”Bus Error”, ”Overload” and ”Supply” indicating of operating conditions and errors  CS31 bus connector (input)

CS31 bus connector (output)

8 connectors for the outputs

PG11 cable gland for the 24 V DC power supply

The terminals for 24 V DC and PE are located under a removable cover. It is accessible from the top of the module. The DIL switch for setting the module address is also under the cover.

Labelling fields

Bore holes for mounting 

Electrical connection

3BUR001978R3701

AdvaBuild 3.7 ControlBuilder User'sGuide

3BUR001980R3701

AdvaBuild 2.7-3.7 TCL User's Guide

3BUR001981R3701

AdvaBuild 2.7-3.7 TLL User's Guide

3BUR002065R3701

AdvaBuild 3.7 Migration User's Guide

3BUR002095R1

DSAI 133K02 Red AI Kit, 32ch, 12bit sing

3BUR002099R1

DSAX 110AK02 AI/AO Kit, 8+8ch, 12bit

3BUR002102R1

Power Supply Tray Kit for RE2x0 cabinets

3BUR002117R3701

AdvaBuild 3.7 TCL Builder User's Guide

3BUR002121R3701

AdvaBuild 3.7 TLL Builder User's Guide

3BUR002124R1

DSDX 180AK01 DI/DO Kit, 32ch

3BUR002125R1

DSDX 180AK02 Red DI/DO Kit, 32ch