ABB 3BHE017628R0102 PPD115A102 club.

Product overview

ABB 3BHE017628R0102 PPD115A102 is a key component in ABB industrial automation product line and belongs to PPD series service club module. This product is specially designed for harsh industrial process control environment, integrates advanced signal processing and protection functions, and is widely used in automatic control systems in oil and gas, electric power, chemical industry and other industries.

Core technical characteristics

High precision signal processing

Adopt 16-bit high resolution ADC converter

Support ±10V and 4-20mA analog input.

The sampling rate can reach 100ks/s.

Built-in digital filtering and noise suppression functions

Multiple protection mechanism

Input overvoltage protection (up to ±30V)

Short circuit protection function

Electromagnetic compatibility conforms to IEC 61000-4 standard.

Working temperature range: -40℃ to +85℃

Intelligent diagnosis function

Real-time channel state monitoring

Fault self-diagnosis and alarm function

Support remote status query

Typical application scenarios

Monitoring of process variables (pressure, temperature, flow rate, etc.)

Safety interlock system

Equipment condition monitoring

Data acquisition system

Technical specification parameters

Parameter specification

Power supply voltage is 24 VDC 10%

Power consumption ≤ 5w

Input impedance > 1mΩ (voltage input)

Accuracy 0.1% fs

Isolation voltage 1500Vrms

Communication interface PROFIBUS DP/PA

Protection grade IP20

Installation and maintenance

It is recommended to install in the control cabinet to avoid direct exposure to harsh environment.

Connect the signal wire with shielded cable.

Check the module status indicator regularly.

It is recommended to calibrate every 2 years.

Product advantage

High reliability design with MTBF exceeding 100,000 hours.

Compact modular design saves installation space.

Compatible with mainstream control systems such as ABB 800xA.

Support hot plug replacement (if the system supports it)

matters need attention

Please confirm that the power supply voltage meets the requirements before installation.

Avoid use in areas with strong electromagnetic interference.

When replacing the module, you need to turn off the power first.

It is recommended that the installation and maintenance be carried out by professional technicians.