1771 Digital I/O AC Input and Output Modules Interfaces your ON/OFF devices to AllenBradley programmable controllers within the 1771 Universal I/O structure. Allen-Bradley digital ac I/O modules interface to ON/OFF devices such as limit switches, pushbuttons, motor starters, pilot lights, and annunciators. These modules are compatible with all current Allen-Bradley programmable controllers. This saves on spare parts, system engineering, inventory, and training costs. Supports highpower operations. The ac solid-state family of digital I/O modules meets requirements for applications from 10-276V ac. These modules exhibit long life (20 million to over 100 million operations). Provides system protection and troubleshooting aids. The ac I/O modules include electrical-optical isolation and filter circuits. To help you troubleshoot your system, module indicators are provided to show input or output status. AC/DC Input Module (Cat. No. 1771IA Series C, and 1771IA2) AC/DC Input Module (Cat. No. 1771IAD Series D) AC Input Module (Cat. No. 1771IAN) Isolated AC/DC Input Module (Cat. No.1771ID) Isolated AC/DC Input Module (Cat. No. 1771ID01) Isolated AC/DC Input Module (Cat. No 1771ID16) AC/DC Input Module (Cat. No. 1771IM) AC/DC Input Module (Cat. No. 1771IMD Series B) AC Input Module (Cat. No. 1771IN) AC/DC Input Module (Cat. No. 1771IND Series B) AC Output Module (Cat. No. 1771OA Series B) AC Output Module (Cat. No. 1771OAD Series C) AC Output Module (Cat. No. 1771OAN) Isolated AC Output Module (Cat. No. 1771OD Series C) Isolated AC Output Module (Cat. No. 1771OD16) Isolated AC Output Module (Cat. No. 1771ODD) Isolated AC Output Module (Cat. No. 1771ODZ) AC Output Module (Cat. No. 1771OM) AC Output Module (Cat. No. 1771OMD Series B) AC Output Module (Cat. No. 1771ON) AC Output Module (Cat. No. 1771OND Series B) Protected AC Output Module (Cat. No. 1771OP) Isolated AC Output Module (Cat. No. 1771OR Series B) . Support Services Technical Support Engineering and Field Services Technical Training Repair and Exchange Services System Compatibility The individual specification sheets included in this document show compatibility and use of the data table for each module. Status Indicators The front panel of each ac discrete I/O module contains status indicators. Each status indicator shows the ON/OFF condition of an individual input or output. Some modules have additional indicators such as Fuse Blown and/or Triac Fail. Keying Plastic keying bands shipped with each I/O chassis let you key your I/O slots to accept only one type of module. You can key any backplane connector in an I/O chassis to receive your module except for the leftmost connector, which is reserved for adapter or processor modules. Power Supply Requirements Modules receive power through the 1771 I/O chassis backplane from the associated chassis power supply. Total the current requirements for all the modules in the chassis to avoid overloading the power supply or the I/O chassis backplane. Module Placement Guidelines Group your modules to minimize adverse effects from radiated electrical noise and/or heat. • Group analog input and low voltage dc modules away from ac modules or high voltage dc modules in the chassis to minimize electrical noise interference. • Place analog input modules and other I/O modules that are sensitive to heat away from slot power supplies to minimize adverse heat effects.
You can contact us if you need anything(kongjiangauto). We are waiting for your message!