1715-AENTR Redundant I/O System Rockwell Automation
From:Rockwell Automation
|
Author:kongjiangauto
|
Time :2020-04-01
|
348 Browse:
|
Share:
1715-AENTR Redundant I/O System Rockwell Automation
1715-AENTR Redundant I/O System Rockwell Automation 1715-IB16D 1715-OB8DE 1715-IF16 1715-OF8I This manual explains how to install and configure the 1715 Redundant I/O System. This redundant, modular system is designed to work with a ControlLogix® Enhanced Redundancy System. This system provides fault tolerant I/O and redundancy for use in critical process applications. This manual is intended for the following individuals, who: – Understand how to configure and use a ControlLogix System, and a ControlLogix Enhanced Redundancy System – Understand how to configure remote devices on an Ethernet/IP network. This list identifies the minimum software versions that are required to use your 1715 Redundant I/O System: • Either RSLogix™ 5000 or Studio 5000® software • RSLogix 5000 programming software, version 20 Non-SIL 2 applications using revision 2.x of 1715 can use version 19 • RSLogix™ 5000 requires Microsoft Windows Vista; Microsoft Windows 7, 32- and 64-bit; and Microsoft Windows 2003 Server operating systems • Studio 5000 environment version 21 or later • Studio 5000 requires Microsoft Windows Vista; Microsoft Windows 7, 32- and 64-bit; and Microsoft Windows 2003 Server operating systems • ControlFLASH™ software version 13.00.00 or later • Adapter Add-on Profile at: Product Compatibility and Download Center website • I/O Modules Add-on Profile at: Product Compatibility and Download Center website • Add-on Instructions at: Product Compatibility and Download Center website