ABB 4944026-004

ABB 4944026-004

With this parameter you can leave the configuration level. The positioner returns to the operating level. Here you can either save data in the nonvolatile memory or discard all previously made changes (also the changes in other parameter groups). 

To leave the configuration level (with or without saving), press and hold ENTER until the countdown from 3 to 0 is finished. 

The active saving process is indicated by the message NV_SAVE. After saving a plausibility check is executed. 

If an error occurs during the check or while saving, the data cannot be saved; an error message is displayed instead (see the chapter titled "Error messages").

Selection:

NV_SAVE Saves settings in the non-volatile memory. 

CANCEL Discards all changes made since the last save to the nonvolatile memory

3BSC950056R1

TK576V115 Cable Assembly 15m (49 ft).

3BSC950057R1

TK580 Cable Assembly

3BSC950057R2

TK580V007 Cable Assembly

3BSC950089R1

TK801V003 Cable, 0.3m

3BSC950089R2

TK801V006 Cable, 0.6m

3BSC950089R3

TK801V012 Cable, 1.2m

3BSC950107R1

TK811V015 POF Cable, 1.5m, Duplex

3BSC950107R2

TK811V050 POF Cable, 5m, Duplex

3BSC950107R3

TK811V150 POF Cable, 15m, Duplex

3BSC950118R1

TK812V015 POF Cable, 1.5m, Simplex

3BSC950118R2

TK812V050 POF Cable, 5m, Simplex

3BSC950118R3

TK812V150 POF Cable, 15m, Simplex

3BSC950166R150

DSTK 222SL15 Cable Assembly ,Round/Ribbo

3BSC950251R1

TKX525V030 Cable, T-Box to DCN Interface