ABB 5SDD1060F0001
With this parameter you determine the valve action for the analog position feedback.
Increasing = position 0 ... 100 % = signal 4 ... 20 mA
decreasing = position 0 ... 100% = signal 20 ... 4 mA
When an alarm / message is generated in the positioner, it is signaled via the digital and analog outputs. You can use the ALARM parameter to select a higher or lower alarm current for analog feedback.
Important
When there is no electrical energy, or during initialization, the output signal > 20.5 mA. In special versions (hardware modification) < 3.8 mA is also possible.
HIGH_CUR Alarm current I > 20.5 mA
LOW_CUR Alarm current I < 3.8 mA
26390603-BX
DSTK 183 Cable Unit
26390799-A
COAX K8 Thick Coaxial Cable, Length=23.4
26390799-C
COAX K9 Thick Coaxial Cable, Length=70.2
26390799-E
COAX K10 Thick Coaxial Cable, Length=117
PM581-ETH*
PM582-ETH*
PM590-ETH*
PM582*
PM572
PM573-ETH
PM582
PM583-ETH
PM590-ETH
PM591-ETH
PM591-2ETH
PM592-ETH
PM595-4ETH-F
TB511-ETH
TB521-ETH
TB523-2ETH
TB541-ETH
TA521
TA541
MC502
TA524
Add: Building F05, High-tech Software Park, Xiamen City, Fujian Province
Tel: 0592-5211302
Mobile: 17750019513 (WhatsApp)
Email: yy4291644@gmail.com
ivy@kongjiangauto.com
Website: https://www.abb-sis.com