ABB 5SHX2645L0004

ABB 5SHX2645L0004

For the digital input, one of the following protective functions can be selected via local operation.

• No function (default) 

• Move to 0 % position 

• Move to 100 % position 

• Hold previous position 

• Disable local configuration 

• Disable local configuration and operation 

• Disable all access (local or via PC) 

The selected function is activated when the 24 V signal is no longer connected to the digital output (< 10 V DC). 

The safety functions POS_0%, POS_100% and POS_HOLD run in the operating level in both types of control modes P1.0 or P1.1. BIN_CTRL is shown in the display.

 If a corresponding function is active, a corresponding value is defined internally for the positioner. The actuator is then driven into the end position or position specified under consideration of the setpoint ramp, configured operating range, selected behavior. 

After selecting a lock CNF_LOCK, OP_LOCK or ALL_LOCK, the key icon is displayed, indicating that the lock will be activated at the next save.

After saving and without 24V at the digital input, the key is permanently displayed.

IMASI02

IMASI03

IMASI13

IMASI23

IMASM03

IMASO01

IMASO11

IMBLK01

IMCIS02

IMCIS12

IMCIS22

IMCOM03

IMCOM04

IMCPM02

IMDSI02

IMDSI12

IMDSI13

IMDSI22

IMDSM04

IMDrSM05

IMDSO01

IMDSO02

IMDSO04

IMDSO14

IMDSO15