101797-001 ABB

101797-001    ABB    

The AC31 system consists of the series 30, 40, 50, and 90. This operating manual describes the series 40 and 50.

The AC31 brings accessibility to beginners and experienced automation users alike, for any application with 14 to approximately 1000 inputs / outputs and more, using the same set of basic components.

From a compact machine fitted with a few automated functions to large installations spread over hundreds of meter, and even kilometers, the AC31 can fit your requirements.

It is therefore possible to realize distributed applications throughout a site, a workshop, or a machine where each component (input / output units, basic unit) is close to the sensors / actuators. The whole setup is connected by a single twisted pair over which all information from the sensors is sent after processing by the basic unit to the actuators via the remote modules. Additional central units configured as slave can also be connected to this CS31 system bus.

In case of the series 40 and 50 the following communication interfaces are available, to extend the AC31’s possibilities and integration with the company's other automation systems: MODBUS, ASCII, ARCNET, RCOM, AF100. The developments in this field are continual.

Many users on all the continents have realized numerous applications such as: Machine control:

- Manufacturing of floor boards

- Assembly of electrical contactors - Manufacturing of ceramic products - Metallic pipe welding, etc.

Controlling-commanding installations:

- Wharf cranes

- Water treatment

- Ski lifts

- Wind power machines, etc.

System management:

- Climatic anagement

- Building power management

- Tunnel ventilation

- Alarms in hospital environments

- Greenhouse lighting / humidity, etc.

CC-TAIM01

CC-TDIL11

CC-TDIL11

CC-TAIX51

CC-TAOX11

CC-TAIX11

CC-TAIN11

CC-TAON11

CC-TDOB01

CC-PCNTOX

CC-TDOB11

CC-TDIL01

51195066-100 /HF-75632-F

51195156-300

51204126-915

51305072-200

51305072-300

51400700-100